Weidmuller
8953590000
1 / 5
Description
Surge protection for instrumentation and control, 12 V, 350 mA, IEC 61643-21, IEC 62305, DIN EN 60079-0.2009, DIN EN 60079-11:2007, DIN EN 60079-26:2007, DIN EN 61241-11:2006, HART-compatible- Part Number
- 8953590000
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Further Details Of Approvals
- GOST certificate
- GOST-Zertifikat
Protection Ex - Data
- ATEX - dust labelling
- II 1 D Ex ia IIIC T135 °C …T85 °C Da
- ATEX - gas labelling
- II 1 G Ex ia IIC T4… T6 Ga
- Certificate No. (ATEX)
- KEMA10ATEX0148X
- IECEx - dust labelling
- II 1 D Ex ia IIIC T135 °C …T85 °C Da
- IECEx - gas labelling
- II 1 G Ex ia IIC T4… T6 Ga
- Input power, max. P
- 3 W
- Input voltage, max. U
- 14 V
- Internal capacity, max. C
- < 4 nF
- Internal inductance, max. L
- 0 µH
- Temperature class T4/135°C (-40°C ... +85°C) li
- 350 mA
- Temperature class T5/100°C (-40 ° C ... +75°C) li
- 250 mA
- Temperature class T6/85 °C (-40 °C ... +60°C) li
- 250 mA
General Data
- Colour
- Light Blue
- Design
- Terminal, miscellaneous
- Optical function display
- No
- Protection degree
- IP20
- Segment
- Measurement - Monitoring - Setting
- UL 94 flammability rating
- V-0
- Version
- without warning function / function indicator
- Protected current loops
- 1
Probability Of Failure
- Λges
- 45
- MTTF
- 2,537 Years
- PFH in 1*10
- 1.95
- SFF
- 95.67 %
- SIL PAPER
- SIL Paper
- SIL in compliance with IEC 61508
- 3
Approvals
- Approvals
- CE, CSAEX, EAC, FUSAFETY, IECEXDEK, KEMAATEX
- ROHS
- Conform
Insulation Coordination Acc. To En 50178
- Pollution severity
- 2
- Surge voltage category
- III
Rated Data Iec / En
- Dielectric strength at FG against PE
- ≥ 500 V
- Discharge current I
- 2.5 kA
- Input voltage, max. U
- 14 V
- Lightning test current, I
- 2.5 kA
- Max. continuous voltage, Uc (DC)
- 14 V
- Number of poles
- 1
- Overload - failure mode
- Modus 2
- Protection level U
- < 800 V
- Protection level on output side Wire-PE 1kV/µs, typically
- 450 V
- Protection level on output side Wire-wire 1 kV/µs, typically
- 25 V
- Protection level on output side Wire-wire 8/20 µs, typically
- 25 V
- Protection level, U
- 25 V
- Pulse-reset capacity
- ≤ 20 ms
- Rated current I
- 350 mA
- Rated voltage (DC)
- 12 V
- Requirements category acc. to IEC 61643-21
- C1, C2, C3, D1
- Signal transmission properties (-3 dB)
- 1.7 MHz
- Signalling contact
- No
- Standards
- IEC 61643-21, IEC 62305, DIN EN 60079-0.2009, DIN EN 60079-11:2007, DIN EN 60079-26:2007, DIN EN 61241-11:2006, HART-compatible
- Surge current-carrying capacity C1
- < 1 kA 8/20 μs
- Surge current-carrying capacity C2
- 5 kA 8/20 μs
- Surge current-carrying capacity C3
- 100 A 10/1000 μs
- Surge current-carrying capacity D1
- 1 kA 10/350 μs
- Voltage type
- DC
- Volume resistance
- 2.20 Ω
Dimensions And Weights
- Width
- 17.8 mm
- Width (inches)
- 0.701 inch
- Height
- 90 mm
- Height (inches)
- 3.543 inch
- Depth
- 69 mm
- Depth (inches)
- 2.717 inch
- Net weight
- 45 g
Csa Protection Data
- Gas group C
- IIB
- Gas group D
- IIA
- Gas groups A, B
- IIC
- Input voltage, max. U
- 14 V
- Internal capacity, max. C
- 4 nF
- Internal inductance, max. L
- 0 µH
Connection Data
- Type of connection
- Pluggable in VSPC BASE
Tender Specification Sheets
- Long specification
- Surge protection plug for use in connection with the base element VSPC BASE 1CL FG for one floating-ground driven paired cable.Two-stage protection circuit consisting of coarse protection, decoupling resistors and fine protection between the signal wires and coarse common mode voltage protection to earth suitable for use in intrinsically-safe Ex ia circuits. Mechanical identification of the plug to the base element according to the switching type and rated voltage. Optical identification of the protected plug based on the type of protected switching and the voltage level. Protected plug with coding pin and counter-profile for the base element. It is possible to mark the plug.
- Short specification
- Surge protection plug for base element VSPC BASE 1CL FG, transverse voltage coarse and fine protection of one floating-ground powered paired cable, suitable for use in intrinsically-safe Ex ia circuits, coarse common mode voltage protection to earth. Version: 12V DC
Classifications
- ETIM 6.0
- EC000943
- ETIM 7.0
- EC000943
- EClass 9.0
- 27-13-08-07
- EClass 9.1
- 27-13-08-07
- EClass 10.0
- 27-13-08-07
- UNSPSC
- 30-21-19-21
Environmental Product Compliance
- REACH SVHC
- Lead 7439-92-1
Temperatures
- Humidity
- 5...96 %
- Operating temperature, max.
- 70 °C
- Operating temperature, min.
- -40 °C
- Storage temperature, max.
- 80 °C
- Storage temperature, min.
- -40 °C
- Operating temperature
- -40 °C...70 °C
- Storage temperature
- -40 °C...80 °C
Ratings Iecex/Atex/Cul
- ATEX certificate
- ATEX Certificate
- IEC Ex certificate
- IECEX Zertifikat
- Certificate No. (ATEX)
- KEMA10ATEX0148X
- CUL certificate
- cUL Certificate
Related products
Other Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther