8965500000

1 / 5

Description

ACT20M, Supply module, Screw connection

Part Number: 8965500000

Get up to 90 days payment terms from 500+ suppliers
Reselling discounts up to 40%!

Send request for price

1

Payment methods:

Request a Quote and we will send you information on availability and price.

General Data

Degree of efficiency: 0,976
Power consumption: < 2 W
Rail: TS 35, CH20M Bus
Voltage supply: 21.6...26.4 V DC

Approvals

Approvals: CULUS, DEKRAATEX, DETNORVER, EAC, FMEX, IECEXDEK
ROHS: Conform
UL File Number Search: E337701

Dimensions And Weights

Width: 22.5 mm
Width (inches): 0.886 inch
Height: 117.2 mm
Height (inches): 4.614 inch
Depth: 113.6 mm
Depth (inches): 4.472 inch
Weight: 140 g
Net weight: 173 g

Connection Data

Type of connection: Screw connection
Tightening torque, min.: 0.4 Nm
Tightening torque, max.: 0.6 Nm
Clamping range, rated connection: 2.5 mm²
Clamping range, min.: 0.5 mm²
Clamping range, max.: 2.5 mm²
Wire connection cross section AWG, min.: AWG 30
Wire connection cross section AWG, max.: AWG 14

Rated Data Ul

UL certificate: E337701.pdf

Input

Number of inputs: 2
Input voltage: 21.6…26.4 V DC
Supply voltage (input): 21.6...26.4 V DC
Input current: max. 4 A
Backup power supply: 21.6...26.4 V DC
Trigger level for the power supply: Fault < 21 V DC

Classifications

ETIM 6.0: EC001600
ETIM 7.0: EC001600
EClass 9.0: 27-24-26-10
EClass 9.1: 27-24-26-10
EClass 10.0: 27-24-26-10
UNSPSC: 30-21-18-01

Output

Number of outputs: 1
Output voltage, note: Input voltage -0.5 V DC / 4 A
Output current: max. 4 A, (Supply of e.g. 110 devices of ACT20M-CI-2CO-S on one CH20M BUS)
Output power: 96 W
Supply voltage (output): 24 V DC

Product Information

Product information: The power-feed unit ACT20-FEED-IN-PRO-S distributes the supply voltage for the ACT20 range of devices to the Weidmüller CH20M DIN rail bus. The device also has a connection for a backup power supply. Installation is basically on the Weidmüller CH20M DIN rail bus. Properties The power-feed unit ACT20-FEED-IN-PRO-S detects errors on each of the devices mounted on the Weidmüller CH20M DIN rail and sends a collective message to an external controller via the internal status relay. Two power supplies for the primary and secondary supply (backup) can be optionally connected. A redundant power supply can be set up using two power-feed units and two separate power supplies. The status relay is activated when the following conditions are met: ◊ The supply voltage is on the connection terminals 51 and 52 ◊ The backup supply voltage is on the terminals 53 and 54. If the backup power supply is not required, the supplied jumper needs to be inserted between terminals 52 and 53. ◊ The devices mounted on the Weidmüller DIN rail do not report any errors The device can be used in safe (non-explosive risk) areas or in Zone 2 / Division 2. The operating status of the power supply and the backup power supply is indicated with two green LEDs. A malfunction is indicated with a red LED.

Environmental Product Compliance

REACH SVHC: Lead 7439-92-1

Insulation Coordination

EMC standards: IEC 61326-1, NE 21

Temperatures

Humidity: 95 %, no condensation
Storage temperature, max.: 85 °C
Storage temperature, min.: -20 °C
Ambient temperature: -20...+60 °C
Storage temperature: -20 °C...85 °C

Ratings Iecex/Atex/Cul

Certificate no. (cULus): E337701

Related products