8975590000

1 / 4

Description

WAVESERIES, Current monitoring, 0...1 A AC/ 0...5 A AC/ 0...10 A AC, 1, 1, Screw connection

Part Number: 8975590000

Get up to 90 days payment terms from 500+ suppliers
Reselling discounts up to 40%!

Send request for price

1

Payment methods:

Request a Quote and we will send you information on availability and price.

General Data

Accuracy: 0.5 % FSR
Configuration: DIP switch
Galvanic isolation: 2-way isolator
Input/Output: 1 /5/ 10 A AC / 4...20 mA (current loop)
Rail: TS 35
Step response time: typ. 700 ms
Temperature coefficient: ≤ 200 ppm/K
Voltage supply: 13...30 V DC, via output current loop

Approvals

Approvals: CE, CULUSEX, EAC
ROHS: Conform

Dimensions And Weights

Length: 72 mm
Length (inches): 2.835 inch
Width: 22.5 mm
Width (inches): 0.886 inch
Depth: 112.4 mm
Depth (inches): 4.425 inch
Weight: 150 g
Net weight: 101 g

Connection Data

Type of connection: Screw connection
Clamping range, rated connection: 2.5 mm²
Clamping range, min.: 0.5 mm²
Clamping range, max.: 2.5 mm²

Tender Specification Sheets

Long specification: Monitoring component for AC currents up to 10A with 4...20 mAloop feed and electrical isolationCurrent monitoring component in 22.5 mm width for recording 50/ 60 HzAC currents 0...1 A / 0...5 A / 0...10 A. Input range can be selected using DIP switches.Power is fed to the component via the 4...20 mA current loop on the output side.The input and output circuits have 6 kV of electrical isolation.Approved for ATEX Zone2 and UL C1 D2 applications.Add-on housing for TS35 rail mountingDimensions: L/W/H 72/ 22.5/ 92.4 mmScrew connection / Nominal cross-section 2.5 mm2Protection degree: IP 20 Input 0...1 A / 0...5 A / 0...10 A AC switchable 50 / 60 HzVoltage of measuring circuit 250 V ACOutput 4...20 mA current loopLoad resistance < 600 Ohm Strom>1 kOhm / voltageTransmission error < 0,5% v. E. Temperature coefficient 200 ppm / KStep response time typ. 700 msAuxiliary power via output-side current loopAmbient temperature range 0 °C...+50 °C Secure isolation EN 50178, 2-way isolation up to 6 kVTest voltage 4 kV input against outputRated voltage 300 V AC/DC at overvoltage category III and pollution degree 2Approvals cULus, cULusEX C1D2, ATEX Zone 2Type WAS1 CMA LP 1/5/10A EX
Short specification: Monitoring component for AC currents up to 10A with 4...20 mAloop feed and electrical isolationCurrent monitoring component in 22.5 mm width for recording 50/ 60 HzAC currents 0...1 A / 0...5 A / 0...10 A. Input range can be selected using DIP switches.Power is fed to the component via the 4...20 mA current loop on the output side.The input and output circuits have 6 kV of electrical isolation.Approved for ATEX Zone2 and UL C1 D2 applications.

Input

Number of inputs: 1
Input current: 0...1 A AC/ 0...5 A AC/ 0...10 A AC
Input frequency: 50...60Hz

Classifications

ETIM 6.0: EC002653
ETIM 7.0: EC002653
EClass 9.0: 27-21-01-20
EClass 9.1: 27-21-01-20
EClass 10.0: 27-21-01-20

Output

Number of outputs: 1
Output signal limit: Approx. 24 mA
Output current: 4...20 mA (current loop)
Load impedance current: ≤ 600 Ω
Offset current: max. 100 µA
Status indicator: LED ON: OK; LED flashing: signal out of range;LED OFF: Error

Product Information

Product information: This product will soon be replaced by a new product.Please do not use with new systems. Please contact our technical support.

Environmental Product Compliance

REACH SVHC: Lead 7439-92-1

Insulation Coordination

Clearance & creepage distances: ≥ 5.5 mm
EMC standards: EN 55011, EN 61000-6
Galvanic isolation: 2-way isolator
Impulse withstand voltage: 6 kV
Insulation voltage: 4 kVeff / 5 s
Pollution severity: 2
Rated voltage: 300 V
Surge voltage category: III

Temperatures

Operating temperature, max.: 50 °C
Operating temperature, min.: 0 °C
Storage temperature, max.: 70 °C
Storage temperature, min.: -20 °C
Operating temperature: 0 °C...50 °C
Storage temperature: -20 °C...70 °C

Related products