ABB Spare Parts & Components Online – Automation Solutions from Trusted Suppliers

The EF19-2.7 is an self-supplied electronic overload relay, which means no extra external supply is needed. It offers reliable and fast protection for motors in the event of overload or phase failure. Easy to use like a thermal overload relay and compatible with standard motor applications, the electronic overload relay is convincing, above all, due to its wide setting range, high accuracy, high operational temperature range and the possibility to select a trip class (10E, 20E, 30E). Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP- and Test function and a trip indication. The overload relays are connected directly to the contactors. Single mounting kits are available as accessory. The EF19 and EF45 have ATEX and IECEx certification 1)

The ABB TMAX T5N 400 is a robust, reliable solution for power distribution in industrial applications. This fixed three-pole breaker is designed to handle high currents and offers enhanced safety features such as front terminals and solid-state release mechanism. It operates at an AC voltage of PR222DS/P-LSI R 400, providing a stable and efficient power supply. Key Features: Fixed three-pole design for enhanced reliability Front terminals for easy wiring Solid-state release mechanism for improved safety

The CP-C.1 24/10.0 is a power supply from the CP-C.1 range. The primary switch mode power supply offers a wide range input of 85-264 V AC and 90-300 V DC, rated input voltage is 110-240 V AC. The rated output power is 240 W, rated output current is 10 A at an output voltage of 24 V DC. The output voltage is adjustable within a range of 22.5 to 28.5 V DC. The power supply provides a U/I output characteristic with a power reserve of up to 50 % and allows parallel operation to increase capacity and to enable redundancy. Further features are: power factor correction acc. to EN 61000-3-2. Redundancy unit and buffer modules are available as accessories.

The Electronic Time Relay CT-MXS.22P is a versatile device from the CT-S timer series, offering five distinct timing functions with an extensive range of time settings spanning from 0.05 seconds to 300 hours.This relay operates under a control supply voltage of 24 - 48 V DC or 24 - 240 V AC and boasts a 2 c/o (SPDT) output with contacts rated at 250 V / 4 A. It features a non-floating triggering control input.The CT-MXS.22P allows for the connection of two remote potentiometers for precise adjustment of time delays, and comes with a sealable transparent cover to prevent unauthorized modifications. The device incorporates maintenance-free Easy Connect Technology with push-in terminals for ease of use.

AF26 4-pole contactors are used for controlling power circuits up to 690 V AC and 440 V DC. They are mainly used for controlling non-inductive or slightly inductive loads (i.e. resistance furnaces...). AF... contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF contactors have built-in surge protection and do not require additional surge suppressors. The AF... series 4-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 4 N.O. main poles, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available.

The CM-SRS.M2S is a versatile current monitoring relay, part of the CM single-phase monitors range. This device operates under a control supply voltage ranging from 24 to 240 V AC/DC and features a 2 c/o (SPDT) output with contacts rated at 250 V / 4 A.It employs a RMS measuring principle for both DC and AC currents, providing three measuring ranges: 0.3-1.5 A, 1-5 A, and 3-15 A. The relay offers the flexibility to monitor overcurrent or undercurrent, with an open- or closed-circuit operating principle, including options for latching function.The hysteresis is adjustable within a range of 3 to 30% of the threshold value. The tripping delay and start-up delay are also customizable, ranging from instantaneous to 30 seconds (0, 0.1-30 s). A transparent cover for protection against unauthorized changes is available as an accessory.The device features screw connection technology with double-chamber cage connection terminals.

The AF16-30-01-13 is a 3 pole - 690 V IEC or 600 UL contactor with 1 built-in auxiliary contact and screw terminals, controlling motors up to 7.5 kW / 400 V AC (AC-3) or 10 hp / 480 V UL and switching power circuits up to 30 A (AC-1) or 30 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (100-250 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

The AF38Z-30-00-21 is a 3 pole - 690 V IEC or 600 UL contactor with screw terminals, controlling motors up to 18.5 kW / 400 V AC (AC-3) or 25 hp / 480 V UL and switching power circuits up to 50 A (AC-1) or 50 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (24-60 V 50/60 Hz and 20-60 V DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

The DDA202 AC-25/0.03 Residual Current Device Block is an integral part of the DDA200 series, designed for seamless integration with MCBs S200 and S300P. This device is engineered to provide robust protection against sinusoidal alternating earth fault currents, indirect contacts, and direct contacts, with a sensitivity of 30 mA.This RCD block is suitable for a wide range of applications, including residential, commercial, and industrial settings. Its versatility makes it an ideal choice for various electrical systems where safety and reliability are paramount.

The AF26Z-30-00-23 is a versatile contactor that supports a wide range of control voltages, from 100-250V 50/60 Hz and DC. This feature ensures reliable operation in unstable networks while minimizing energy consumption.This contactor is designed for motor control up to 11 kW / 400 V AC and switching power circuits up to 45 A, making it suitable for a wide range of industrial applications. Its block type design allows for easy extension with add-on auxiliary contact blocks and a variety of accessories.The AF26Z-30-00-23 also features built-in surge protection, providing a compact and reliable solution for your power control needs.

The ABB PSR72-600-11 is a versatile softstarter designed for three-phase motors with nominal currents ranging from 3 to 105 A. It boasts a rated maximum operational current of 72A and operates at voltages spanning from 208V to 600V AC, making it suitable for a wide range of applications. Key Features: Rated control voltage: 24 V AC/DC Two-phase control soft start and stop through a voltage ramp Built-in bypass for easy installation and energy saving RUN and TOR signal available from relay output in NO (normally open state) Easy to set start/stop ramp and time with three potentiometers on the front Compatible with manual motor starters (MMS) for mechanical connection kits Fieldbus communication enabled by external adaptor and Fieldbus plug The PSR72-600-11 is a compact softstarter that can manage up to 100 starts per hour, making it an ideal choice for applications such as pumps, fans, compressors, and conveyors.

The C.BREAKER SACE EMAX2 E2.2N 2000 is a fixed four-pole breaker with terminals at the rear, horizontal and solid-state release in AC. It is designed for use with the Ekip/Touch-LSI R 2000 and features 4 auxiliary contacts and C.BREAKER in position open-closed.

The softstarter PSR3-600-11 has a rated maximum operational current of 3 A with an operating voltage span from 208...600 V AC. The rated control voltage is 24 V AC/DC. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

The softstarter PSE37-600-70 has a rated maximum operational current of 37 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general pur­pose softstarter. It’s a perfect balance be­tween high starting capacity and cost effi­ciency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.

The CT-ERS.22P is a single-function electronic time relay from the CT-S timer range. It provides an ON-delay (delay on make) function with 10 time ranges from 0.05 s to 300 h. This time relay operates with a rated control supply voltage of 24 - 48 V DC / 24 - 240 V AC and has a 2 c/o (SPDT) output with contacts rated at 250 V / 4 A. A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers maintenance free Easy Connect Technology with push-in terminals.

AF16 contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF... contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF contactors have built-in surge protection and do not require additional surge suppressors. The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, 1 built-in auxiliary contact, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available. Note: AF..-30-..-11 not suitable for a direct control by PLC-output. AF..-30-..-11 contactor type available in some countries: please consult your ABB representative.

The E2.2N 1000 Ekip Hi-Touch LSI 4p F HR is a fixed four-pole breaker with terminals rear horizontal and solid-state release, designed for AC applications in the EKIP/HI-TOUCH-LSI R 1000 series. It is equipped with 4 auxiliary contacts and a C.BREAKER in position open-closed.

The Safety Control Module is a crucial adaptation unit that transforms the OSSD outputs (PNP) from Focus II, enabling their use in dynamic circuits. This module features an additional M12 connector, which allows for the connection of a light protection transmitter for power.

The E4.2N 3200 Ekip Dip LSI 3p F HR is a three-pole fixed circuit breaker with rear horizontal and solid-state release, designed for AC applications in the Ekip/DIP-LSI R 3200 series. This model features 4 auxiliary contacts and a C.BREAKER in position open-closed.

The AF16-30-10-12 is a 3 pole - 690 V IEC or 600 UL contactor with 1 built-in auxiliary contact and screw terminals, controlling motors up to 7.5 kW / 400 V AC (AC-3) or 10 hp / 480 V UL and switching power circuits up to 30 A (AC-1) or 30 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (48-130 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.