Bosch Rexroth Industrial Automation Spare Parts

Carrying plates, variable 19.05 455/650 - For combination with a base pallet to form a WT 5 workpiece pallet - For finishing fixtures by the user - Variable sizes in 2 thicknesses - Carrying plate, ready to assemble with mounting holes

Carrying plates, variable 12.7 455/650 - For combination with a base pallet to form a WT 5 workpiece pallet - For finishing fixtures by the user - Variable sizes in 2 thicknesses - Carrying plate, ready to assemble with mounting holes

VE 5/OCD-300 stop gate - Damped stopping of one or more accumulating workpiece pallets at the defined workpiece pallet stop surfaces. - Pneumatic stop gate with steplessly adjustable damping. When the pressure is released the stop gate is closed by a spring and the workpiece pallet is stopped. - Compressed air connection: 5 ... 6 bar - Pneumatic connection, pushlock Ø 6 mm - Installation location AO = 1: ST 5/OC; AS 5/OC; PE 5/OC; PE 5/OC-T - Installation location AO = 2: PE 5/OC; PE 5/OC-T (b = 455; lT = 455) - Installation location AO = 3: PE 5/OC (b = 455; lT = 650) - Installation location AO = 4: PE 5/OC-T (lT = 455; b = 650)

VE 5/OC-200 stop gate - Stopping one or more accumulating workpiece pallets at the defined workpiece pallet stop surface. - Pneumatic stop gate. When the pressure is released the stop gate is closed by a spring and the workpiece pallet is stopped. - Compressed air connection: 5 ... 6 bar - Pneumatic push-in fitting: 6 mm

ST 5/OC conveyor unit - The conveyor unit is a ready-for-operation module used to transport workpiece pallets - The open center allows processes from below - Reversible operation possible - Accumulation operation possible - Support profile made of anodized aluminum - Permissible section load: 380 kg/m - Lateral guide profile made of steel, polymer, or aluminum in an anodized aluminum support - Driven via king shaft with bevel wheels made of polymer or sintered metal - Suitable for clean room of ISO class 7 - Suitable for dry room <1% RH

Carrying plates, variable 12.7 845/845 - For combination with a base pallet to form a WT 5 workpiece pallet - For finishing fixtures by the user - Variable sizes in 2 thicknesses - Carrying plate, ready to assemble with mounting holes

Carrying plates, variable 19.05 845/845 - For combination with a base pallet to form a WT 5 workpiece pallet - For finishing fixtures by the user - Variable sizes in 2 thicknesses - Carrying plate, ready to assemble with mounting holes

Carrying plates, variable 19.05 845/1040 - For combination with a base pallet to form a WT 5 workpiece pallet - For finishing fixtures by the user - Variable sizes in 2 thicknesses - Carrying plate, ready to assemble with mounting holes

Carrying plates, variable 12.7 845/1040 - For combination with a base pallet to form a WT 5 workpiece pallet - For finishing fixtures by the user - Variable sizes in 2 thicknesses - Carrying plate, ready to assemble with mounting holes

ST 5/XH connection bridge - The connection bridge is used for length adjustment when parallel transverse sections are used with lift transverse units and curves/diverters/junctions - Support profile made of anodized aluminum - Permissible section load for ST 5/XH: 380 kg/mST 5/H: 200 kg/m - Lateral guide profile made of steel, polymer, or aluminum in an anodized aluminum support - Driven via king shaft with bevel wheels made of polymer or sintered metal - Notice: In contrast to a conveyor unit or a drive module, curves, diverters and junctions have a different roller distance. The connection bridge is not a conveyor unit with a standard roller distance.

Carrying plates, variable 19.05 650/845 - For combination with a base pallet to form a WT 5 workpiece pallet - For finishing fixtures by the user - Variable sizes in 2 thicknesses - Carrying plate, ready to assemble with mounting holes

Carrying plates, variable 12.7 650/845 - For combination with a base pallet to form a WT 5 workpiece pallet - For finishing fixtures by the user - Variable sizes in 2 thicknesses - Carrying plate, ready to assemble with mounting holes

ST 5/H connection bridge - The connection bridge is used for length adjustment when parallel transverse sections are used with lift transverse units and curves/diverters/junctions - Support profile made of anodized aluminum - Permissible section load for ST 5/XH: 380 kg/mST 5/H: 200 kg/m - Lateral guide profile made of steel, polymer, or aluminum in an anodized aluminum support - Driven via king shaft with bevel wheels made of polymer or sintered metal - Notice: In contrast to a conveyor unit or a drive module, curves, diverters and junctions have a different roller distance. The connection bridge is not a conveyor unit with a standard roller distance.

Belt section CSS/NT-2 - Transport of plates up to 160 °C, e.g. as transport system after lamination - Conveyor medium with high friction coefficient allows high acceleration and deceleration - No slipping of the modules on the belt section - Longitudinal conveyor for glass modules - Suitable for transport of plates up to 160 °C, e.g. as transport system after lamination - Not intended for accumulation operation - Belt section consisting of two to five tracks for secure support of the glass modules across the entire width. Distance between the tracks can be determined individually (b1 to b4). Comply with minimum dimensions - Permissible load:‒ Per track: max. 0.3 kg/cm support surface length and max. 60 kg‒ Per belt section: max. 120 kg - Suitable for reversible operation up to 1500 mm section length - Special textile toothed belt with Viton coating - Dynamic belt tensioner for offsetting the belt stretching due to the temperature exposure - Simple exchange of the continuous toothed belts by dismantling from the side without realignment. Also possible for inner tracks due to couplings on the hexagonal shaft - Gear motors are suitable for operation with frequency converter - Price benefit when ordering certain standard lengths as well as significant shortening of the delivery time for toothed belts in case of servicing - Suitable for use in cleanroom environments up to cleanroom class 7 in accordance with ISO 14644-1

Belt section CSS/NT-5 - Transport of plates up to 160 °C, e.g. as transport system after lamination - Conveyor medium with high friction coefficient allows high acceleration and deceleration - No slipping of the modules on the belt section - Longitudinal conveyor for glass modules - Suitable for transport of plates up to 160 °C, e.g. as transport system after lamination - Not intended for accumulation operation - Belt section consisting of two to five tracks for secure support of the glass modules across the entire width. Distance between the tracks can be determined individually (b1 to b4). Comply with minimum dimensions - Permissible load:‒ Per track: max. 0.3 kg/cm support surface length and max. 60 kg‒ Per belt section: max. 120 kg - Suitable for reversible operation up to 1500 mm section length - Special textile toothed belt with Viton coating - Dynamic belt tensioner for offsetting the belt stretching due to the temperature exposure - Simple exchange of the continuous toothed belts by dismantling from the side without realignment. Also possible for inner tracks due to couplings on the hexagonal shaft - Gear motors are suitable for operation with frequency converter - Price benefit when ordering certain standard lengths as well as significant shortening of the delivery time for toothed belts in case of servicing - Suitable for use in cleanroom environments up to cleanroom class 7 in accordance with ISO 14644-1

Belt section CSS/F-3 - Conveyor medium with high friction coefficient allows high acceleration and deceleration - No slipping of the modules on the belt section - Same system dimensions as CSS/B - Longitudinal conveyor for glass modules of various dimensions - Not intended for accumulation operation - Belt section consisting of two to five tracks for secure support of the glass modules across the entire width. Distance between the tracks can be determined individually (b1 to b4). Comply with minimum dimensions - Permissible load:‒ Per track: max. 0.15 kg/cm support surface length and max. 40 kg‒ Per belt section: max. 120 kg - Suitable for reversible operation (up to 3000 mm) - Textile toothed belt with PU coating for high friction coefficients and improved static friction when starting and accelerating - Simple exchange of the toothed belts by dismantling from above without realignment - Gear motors are suitable for operation with frequency converter - Motor mounting on right (MA = R) or left (MA = L) possible on each track of the belt section (MS = 1 ... 5; MS = 1 denotes the left track in the direction of transport). When mounting the motor between the tracks, observe a minimum distance of 165 mm (b1 to b4) - Motor mounting outside: suspended or lying down;Motor mounting between the tracks: suspended - Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K) - Version with lateral guide (FP = 1) preferably for fully framed glass modules; version without lateral guide (FP = 0) preferably for unprocessed glass modules with rough edges - Suitable for use in cleanroom environments up to cleanroom class 6 in accordance with ISO 14644-1

Belt section CSS/NT-3 - Transport of plates up to 160 °C, e.g. as transport system after lamination - Conveyor medium with high friction coefficient allows high acceleration and deceleration - No slipping of the modules on the belt section - Longitudinal conveyor for glass modules - Suitable for transport of plates up to 160 °C, e.g. as transport system after lamination - Not intended for accumulation operation - Belt section consisting of two to five tracks for secure support of the glass modules across the entire width. Distance between the tracks can be determined individually (b1 to b4). Comply with minimum dimensions - Permissible load:‒ Per track: max. 0.3 kg/cm support surface length and max. 60 kg‒ Per belt section: max. 120 kg - Suitable for reversible operation up to 1500 mm section length - Special textile toothed belt with Viton coating - Dynamic belt tensioner for offsetting the belt stretching due to the temperature exposure - Simple exchange of the continuous toothed belts by dismantling from the side without realignment. Also possible for inner tracks due to couplings on the hexagonal shaft - Gear motors are suitable for operation with frequency converter - Price benefit when ordering certain standard lengths as well as significant shortening of the delivery time for toothed belts in case of servicing - Suitable for use in cleanroom environments up to cleanroom class 7 in accordance with ISO 14644-1

Lift transverse unit LTS/F-3 - Lift transverse unit LTS/…, consisting of a belt section CSS/… and a lift unit for setting up right-angled section branches - Version with two to four tracks. Distance between the tracks can be determined individually (b1 to b3). Comply with minimum dimensions - Permissible load:‒ Per track: max. 0.15 kg/cm support surface length and max. 40 kg for LTS/F,max. 60 kg for LTS/B ‒ Per belt section: max. 120 kg - O-rings for high friction coefficients and improved static friction for transverse conveyor - Tracks without lateral guide - Reversible across the entire value range - Simple exchange of the toothed belts - Gear motors are suitable for operation with frequency converter - Motor mounting on right (MA = R) or left (MA = L) possible on each track of the belt section (MS = 1 ... 4; MS = 1 denotes the left track in the direction of transport) - Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K) - Two lift positions

Lift transverse unit LTS/B-3 - Lift transverse unit LTS/…, consisting of a belt section CSS/… and a lift unit for setting up right-angled section branches - Version with two to four tracks. Distance between the tracks can be determined individually (b1 to b3). Comply with minimum dimensions - Permissible load:‒ Per track: max. 0.15 kg/cm support surface length and max. 40 kg for LTS/F,max. 60 kg for LTS/B ‒ Per belt section: max. 120 kg - O-rings for high friction coefficients and improved static friction for transverse conveyor - Tracks without lateral guide - Reversible across the entire value range - Simple exchange of the toothed belts - Gear motors are suitable for operation with frequency converter - Motor mounting on right (MA = R) or left (MA = L) possible on each track of the belt section (MS = 1 ... 4; MS = 1 denotes the left track in the direction of transport) - Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K) - Two lift positions

Belt section CSS/FM-5 - Conveyor medium with high friction coefficient allows high acceleration and deceleration - Mounting position of the motor central - Same system dimensions as CSS/B - Longitudinal conveyor for glass modules of various dimensions - Use for installation situations in which there is no space for the motor at the ends of the belt section - Not intended for accumulation operation - The position of the motor can be freely selected in the longitudinal direction (l1) - Version otherwise the same as CSS/F