Tools & Accessories SolaHD

K-Factor Transformers are engineered to accommodate harmonic currents generated by non-linear loads, effectively preventing insulation system temperature ratings from being exceeded. This design mitigates the effects of naturally occurring stray losses that can lead to significant overheating and premature failure in standard transformers.The transformer’s core and coil configuration efficiently manages DC flux resulting from triplen harmonics. Rated for Group A with K-4 specifications, the transformer operates on a 480 ∆ primary voltage with a 208Y/120 secondary voltage, and is available in various kVA ratings including 15, 30, 45, 75, 112.5, 150, 225, 300, and 500. Additionally, Group B and Group C configurations are available, with K-13 and K-20 ratings respectively, across similar voltage and kVA specifications.Designed for three-phase applications, this transformer operates at a frequency of 60 Hz and features aluminum windings with a temperature rise rating of +150°C.

The SBE Series encapsulated copper wound transformers are designed specifically for industrial control applications, offering extensive protection against moisture, dirt, and contaminants due to their epoxy encapsulation.These transformers feature deep, molded terminal barriers that minimize the risk of electrical failures caused by arcing or damaged lead wires. Their rugged construction ensures dependable performance in challenging environments.With specifications catering to various voltage configurations, including primary voltages of 120 x 240, 220 x 440, and 240 x 480 Volts, the transformers support multiple secondary voltages such as 24, 110, and 115 Volts. The SBE Series is available with continuous VA ratings ranging from 50 to 1000 VA, making it versatile for a range of industrial applications. The temperature rise for these units is rated at +55°C, and they are equipped with copper windings mounted on a steel plate.

Drive Isolation Transformers are specifically engineered for SCR (Silicon Control Rectifier) variable speed motor drive systems, serving to magnetically isolate the incoming line from the motor drive. These transformers are essential for adjusting the voltage to align with the requirements of the SCR Drive. The standard configurations utilized include delta primary and wye secondary, which are compatible with typical power sources used in three-phase rectifier circuits.With an input voltage range of 460-575 Vac and a KVA rating spanning from 7.5 to 440 kVA, these transformers support a variety of drive horsepower ratings from 5 to 400. The output voltage range is between 133-460 Vac, accommodating diverse operational needs. The windings are constructed from aluminum, and the temperature rise is rated at +150°C, ensuring reliability under demanding conditions.

The SBE Series encapsulated copper wound transformers are specifically constructed for industrial control applications, providing exceptional protection against moisture and contaminants due to their epoxy encapsulation. These transformers feature a variety of primary voltage options, including 120 x 240 Volt, 220 x 440 Volt, and 240 x 480 Volt, with secondary voltages of 24 Volt and 120 Volt. The design incorporates extra deep, molded terminal barriers to minimize electrical failure risks caused by arcing or frayed lead wires.With a temperature rise of +55°C, these transformers are capable of delivering continuous VA ratings ranging from 50 to 750, accommodating diverse industrial power requirements. The copper windings enhance conductivity and reliability, while the sturdy steel mounting plate ensures secure installation. This configuration makes the SBE Series particularly suitable for environments where durability and consistent performance are critical, aligning with the designation code E050TF.

The Automation Transformers are designed for applications requiring non-ventilated encapsulated transformers with power ratings ranging from 50 VA to 45 kVA. These transformers are suitable for use in hazardous locations and harsh industrial conditions.Featuring rugged NEMA 3R enclosures, they ensure protection against dust and moisture. This encapsulation also provides enhanced resistance to shock and vibration, making them ideal for demanding environments. They are UL Listed and meet the latest National Electrical Code standards for Class I, Division 2, Group A-D locations, provided they are installed in accordance with NEC 501.100(B).With options for 50 or 60 Hz operation and the flexibility of single or three-phase configurations, these transformers utilize aluminum windings, ensuring a reliable performance across various applications.

The SBE Series encapsulated copper wound transformers are specifically designed for industrial control applications. These transformers feature epoxy encapsulation, which protects the core and coils from moisture, dirt, and other contaminants commonly found in industrial environments. The construction includes extra deep molded terminal barriers that help prevent electrical failures due to arcing or frayed lead wires. Available in multiple configurations, these transformers support primary voltages ranging from 120 x 240 volts up to 600 volts and secondary voltages of 24, 110, 115, or 120 volts. The units operate at frequencies of 50/60 Hz, with continuous VA ratings varying from 50 to 1000 VA, allowing for versatile application across a range of industrial settings. The rugged design ensures reliable performance, making the SBE Series particularly suitable for demanding conditions.

The STV100K Series is designed to deliver effective surge protection across various applications, including service entrances and branch panels. It features comprehensive all mode protection and includes LED and audible alarm indicators for monitoring operational status.With a fault current fusing capability of 100 kAIC, this device ensures enhanced safety through thermal fusing mechanisms. The operational specifications include an input voltage range of 120 to 480 Vac and support for both single-phase and three-phase configurations. Additionally, the device operates effectively in temperatures ranging from -40°C to +60°C.Noise attenuation is rated at a maximum of 40 dB, and the device is compatible with frequencies of 47-63 Hz. It can be mounted in either parallel or flange configurations, making it versatile for various installation requirements.

The SBE Series encapsulated copper wound transformers are specifically designed for industrial control applications. These transformers are epoxy encapsulated, providing protection for the cores and coils against moisture, dirt, and various industrial contaminants. Featuring extra deep molded terminal barriers, the design minimizes the risk of electrical failures caused by arcing or frayed lead wires. The rugged construction ensures reliability, making this transformer suitable for challenging industrial environments. With a variety of configurations, this model supports primary voltages ranging from 120 x 240 volts to 600 volts, and secondary voltages from 24 volts to 120 volts. The temperature rise is capped at +55°C, and windings are constructed using copper. The transformers can be mounted on a steel mounting plate, ensuring stability and durability.

The Low Temperature Rise Ventilated Transformers, designated as PN E5HB300S, incorporate a +220°C insulation system that allows for a temperature rise of only +80°C or +115°C at full nameplate load. This innovative design results in operating losses that are 13-21 percent lower compared to traditional +150°C rise transformers. The enhanced thermal management not only improves operational efficiency but also increases reliability, providing a +35°C thermal reserve on +115°C rise units and a +70°C reserve on +80°C rise units. These transformers are capable of short-term overloads of 15-30 percent when operated at +150°C rise. They are available in various configurations, including single-phase options with a primary voltage of 240 x 480 Volts and a secondary voltage of 120/240 Volts, as well as three-phase configurations with primary voltages of 480 ∆ and secondary voltages ranging from 208Y/120 to 240 ∆. The transformer capacity options include 15, 25, 37.5, 50, 75, 100 kVA for single-phase and 15, 30, 45, 75, 112.5, 150, 225, and 300 kVA for three-phase models, all designed to operate at a frequency of 60 Hz with aluminum windings.

The HZ Series Industrial Control Transformers are specifically engineered for scenarios demanding external transformer placement outside the control panel to mitigate heat and cost concerns. This model is encapsulated and utilizes copper windings, suitable for various industrial uses. The transformer includes a UL Class +180°C insulation system, accommodating a temperature rise of +80°C at full load.Standard configurations are UL Listed with NEMA Type 3R ratings, ensuring rainproof capabilities. Additionally, custom options are available to meet NEMA Type 4, 4X, and 12 specifications. With a primary voltage range from 220 to 575 volts and secondary voltage options between 110 and 240 volts, this transformer caters to diverse operational needs.

The SBE Series encapsulated copper wound transformers are designed for industrial applications, featuring epoxy encapsulation that safeguards the cores and coils from moisture, dirt, and other contaminants. The transformers are equipped with deep, molded terminal barriers which minimize the risk of electrical failures due to arcing or frayed lead wires.These transformers support a range of primary voltages including 120 x 240 Volt, 220 x 440 Volt, and 240 x 480 Volt, with secondary voltages of 24, 110, and 120 volts, catering to various operational needs. With a KVA rating that spans from 50 to 750 and a temperature rise limit of +55°C, the SBE transformers are engineered to perform reliably in demanding environments. The copper windings and sturdy steel mounting plates further enhance their durability, making them suitable for a wide array of industrial applications.

The ICE International Series transformers are designed with versatility in mind, featuring a primary voltage range that accommodates various global standards. Specifically, the unit supports options between 240 to 600 volts for the primary side and 120 to 240 volts for the secondary side, making it suitable for a wide array of applications. With a continuous VA rating of 2000, these transformers are capable of handling significant electrical loads. Notably, they have a temperature rise of +80°C, ensuring reliable performance under demanding conditions. The copper windings enhance conductivity and efficiency, while the encapsulated design provides added protection. These transformers are CE marked and comply with cULus standards, making them ideal for OEM export equipment. Their IP20 touchproof terminations ensure safety in various environments. The flexibility of the standardized primary coil supports multiple worldwide voltage combinations, further increasing their applicability.

The SBE Series encapsulated copper wound transformers are specifically engineered for industrial control applications, featuring epoxy encapsulation that safeguards the cores and coils from moisture, dirt, and various industrial contaminants. This encapsulation enhances durability in challenging environments.With a selection of primary voltage configurations, including 120 x 240 volts and 220 x 440 volts, and secondary outputs of 24, 110, and 115 volts, these transformers cater to diverse operational requirements. The transformers are rated for continuous VA from 50 to 1000, accommodating different power demands effectively.Furthermore, the design includes extra deep, molded terminal barriers that significantly reduce the risk of electrical failure due to arcing or frayed lead wires, making them ideal for industrial settings. The rugged construction and proven reliability of the SBE design, along with a temperature rise rating of +55°C, ensure long-lasting performance in various applications.

The General Purpose Ventilated Transformers, designated as PN E5HB150S, are engineered for versatility in various electrical applications. These transformers feature a dry type construction and are classified as isolation transformers, capable of stepping up or down voltage as required. Available configurations include single-phase and three-phase models suitable for both indoor and outdoor use, with power ratings ranging from 15 kVA to 500 kVA.Specific configurations include single-phase options with primary voltages of 240 x 480 Volts and secondary outputs of 120/240 Volts, as well as multiple three-phase arrangements. Notable three-phase varieties operate at 480 Volt Δ primary with secondary outputs including configurations of 208/120 Volts and 480Y/277 Volts, among others. The temperature rise is rated at +150°C and the windings can be constructed from either aluminum or copper, accommodating various installation conditions and load requirements.

The ICE International Series transformers are designed to meet international standards, featuring CE marking and cULus approval. These transformers are equipped with IP20 touchproof terminations and utilize copper windings within an encapsulated structure. Operating within a range of 750 to 2,000 VA, these units are capable of handling a temperature rise of +80°C. The design incorporates a standardized primary coil, allowing for compatibility with multiple voltage combinations used worldwide. This flexibility positions the ICE International Series as an optimal choice for OEM export equipment.

The HZ Series industrial control transformers are specifically engineered for scenarios where external mounting outside of the control panel is essential due to cost or thermal constraints. This encapsulated transformer features copper windings and is designed to handle a temperature rise of +80°C under full load, utilizing a UL Class +180°C insulation system.Standard configurations are UL Listed and comply with NEMA Type 3R standards, making them rainproof. Additionally, custom models are available to meet UL Listed/NEMA Type 4, 4X, and 12 specifications. With a variety of primary voltage options ranging from 220 to 575 volts and secondary voltage options from 110 to 240 volts, these transformers support diverse electrical needs. The available KVA ratings of 1, 1.6, 2, 3, 6, 7.6, and 10 cater to various load requirements, ensuring flexibility and adaptability for different industrial applications.