Circuit Breakers & Fuses

These accessories are aluminium bare cable connectors for Compact NSX 100/160/250 and EasyPact CVS 100/160/250. These connectors can receive 1 copper or aluminium cables from 25mm² to 95mm². The connectors snap directly on to the device terminals or are secured by clips to terminal extensions. The rated current is up to 250 A. They are sold by set of 3 parts.

This standard MX shunt trip is used on Compact NSXm and PowerPact B devices. This auxiliary is used for emergency off or failsafe remote opening applications. It is a one click spring type auxiliary for quick and easy installation, visible from the front face of the device. This MX auxiliary has a 220/240VAC 50Hz, 208/240/277VAC 60Hz or 250VDC rated voltage. It trips the circuit breaker when the control voltage rises above 70% of its rated value. It complies with IEC 60947-2 standard. Compact NSXm and PowerPact B embed either 1 MN or 1 MX coil.

These accessories are aluminium bare cable connectors for Compact NSX 100/160/250 and EasyPact CVS 100/160/250. These connectors can receive 2 copper or aluminium cables from 50mm² to 120mm². The connectors are screwed directly on the device terminals or right angle terminal extensions. The rated current is up to 250 A. They are sold by set of 3 parts.

The TeSys Ultra Control Unit is designed to be inserted into power bases such as LUB12, LUB32, and LUB38 to form a starter controller for 3-phase motor applications up to 1.5kW@400V. It offers full protection to motors with a rated current of 1.25-5A (adjustable), overload tripping class 10, short circuit at 13 times the maximum current, and overcurrent at 14.2 times the rated current. It also provides protection against phase loss and insulation faults (protection of equipment only). This control unit is compatible with a voltage range of 110-240V AC / 110-220V DC for controlling the starter through the control terminals A1/A2 located in the power base. It is certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), and is Green Premium compliant (RoHS/REACh).

TeSys U Modbus communication splitter box with 10 x RJ45 connectors and 1 screw terminal block. On front side, it provides 8 x RJ45 connectors for tap-off and 2 x RJ45 connectors for daisy chain. On the underside, it provides a 4-point screw terminal block for Modbus trunk cable connection. To be clipped on a 35mm DIN rail or fixed by 2 screws on panel. Green Premium compliant (RoHS/REACh).

This is a standard motor mechanism for Compact NSX 250 and PowerPact Multistandard J frame devices that allows automatic device spring-charging. It helps the circuit breaker to feature a high mechanical endurance as well as easy and sure opening or closing operations. It provides a double insulation of the front face and all indications remain visible and accessible. The control voltage of this motor mechanism module is 24VDC to 30VDC. The consumption is less than 500W. Padlocking of the device remains possible. The motor mechanism is supplied with SDE adapter.

These aluminium bare cable connectors are specifically designed for use with Compact NSX 400/630 and EasyPact CVS 400/630. They provide a reliable solution for connecting 2 copper or aluminium cables, ranging from 35mm² to 240mm². The connectors can be directly screwed onto the device terminals or right angle terminal extensions. Key Features: Suitable for cables with cross-sectional areas from 35mm² to 240mm² Rated current of up to 630A Can be screwed directly onto device terminals or right angle terminal extensions

The Schneider Electric LV432476 is a robust motor control circuit breaker that offers reliable protection against overloads, short circuits, and ground faults. It is suitable for a wide range of industrial applications such as pumps, compressors, conveyors, and more.With a rated current of up to 32A, this circuit breaker ensures optimal performance and safety. It features a thermal-magnetic trip unit with adjustable overload protection and a fixed short-circuit protection for efficient operation.The LV432476 comes with a variety of accessories including auxiliary contacts, shunt trips, and undervoltage releases to cater to diverse application needs. Its compact and modular design allows for easy installation and maintenance, making it an ideal choice for industrial automation systems.

These accessories are spreaders for 3 poles Compact NSX 400/630 and EasyPact CVS 400/630. They are screwed to the circuit-breaker terminals to increase the pitch between poles from 45mm to 70mm. The rated current is up to 630 A. These spreaders are supplied with flexible interphase barriers for insulation reinforcement. They are sold by set of 3 parts.

The LV432532 from Schneider Electric is a highly advanced industrial automation product that is designed to deliver optimum performance and reliability in demanding industrial applications. This component is built to provide advanced motor protection and control capabilities for a wide range of industrial machines and processes. With its advanced features and capabilities, the LV432532 is ideal for use in a variety of industrial settings, including manufacturing plants, power generation facilities, and more. The product is designed to meet the highest industry standards for reliability and performance, and is backed by Schneider Electric's commitment to exceptional customer service and support. If you're looking for a high-quality industrial automation product that is built to last, the LV432532 from Schneider Electric is an excellent choice.

The Standard Motor Mechanism Module MT250 is designed for use with the ComPacT NSX250 and PowerPact Multistandard J frame devices. This module facilitates automatic spring-charging, enhancing the circuit breaker's mechanical endurance and ensuring reliable opening and closing operations. The module features double insulation on the front face, maintaining visibility and accessibility of all indications. With a control voltage range of 220VAC to 240VAC 50/60Hz or 208VAC to 277VAC 60Hz, it offers versatile compatibility. The motor mechanism consumes less than 500VA and supports padlocking, ensuring secure operations. Additionally, it comes with an SDE adapter for enhanced functionality.

The LV432475 is a motor circuit breaker from Schneider Electric designed for industrial automation applications. It is capable of protecting motors up to 80A and 37kW, making it suitable for a wide range of industrial processes. The breaker features a thermal magnetic trip unit that provides reliable and accurate protection against overloads and short circuits. It also has a range of auxiliary contacts for remote indication and control, as well as a rotary handle for easy and secure operation. The LV432475 is designed to meet international standards for safety and performance, making it a reliable and cost-effective choice for industrial automation projects.

This is a plug-in base for 4 poles Compact NSX 400/630 circuit breakers. The plug-in base is part of a complete plug-in kit. A plug-in configuration is made by adding a plug-in kit to a fixed Compact NSX device. A plug-in configuration allows to install or extract rapidly and easily the circuit breaker from its base. This operation can be done without connecting or disconnecting the power circuit.

TeSys T is a motor management system that provides full motor monitoring, control, and protection when used with short circuit protection and a contactor. TeSys T manages most critical processes while reducing downtime and increasing productivity. TeSys T is a flexible system that integrates seamlessly into your automation system through five major communication protocols. TeSys T predicts what will happen in the process, as it accurately monitors current, voltage, and power over a wide range. This controller is the central component in the motor management system. The module manages the basic functions of the motor management system. It manages the measurement of 3 phase current via integral current transformers from 0.4 to 100 A or up to 810 A by external current transformers. It also measures ground current with internal or external ground sensors, motor temperature and the inputs and outputs for the various motor control modes, detected fault management and other functions. Profibus DP protocol is used by this controller. This module has 6 discrete logic inputs, 3 relay logic outputs and a relay output for detected fault signaling overload relay. The current range of this controller is 5 to 100 amperes. 24 VDC is used to power this controller. Controller is 2.40 inches tall, 3.58 inches wide and 4.82 inches deep. Controller weighs 1.17 lbs. Controller has the following certifications: UL, CSA NOM, ATEX, BV, EAC, RINA, LROS, DNV, ABS, GL, KERI, RMRoS, C-Tick and CCC.

The TeSys T is a robust motor management system designed to provide full motor monitoring, control, and protection. It supports six communication protocols including Modbus™, CANopen, DeviceNet&trademark;, Profibus&trademark;, Ethernet/IP, and Modbus/TCP. This system consists of several components including the LTMR controller, expansion module, HMI, and software along with various accessories.The LTMR controller is the main component that manages basic functions such as ground current measurement, motor temperature monitoring, and three-phase current measurement. It also includes logic inputs and outputs for fault management. The expansion module provides additional inputs and measures voltage between phases for enhanced functionality.TeSys T offers high reliability and a long product life due to its advanced electronic protection and all-in-one design. It is suitable for harsh environments such as dusty atmospheres, marine applications, high vibration applications, and corrosive atmospheres. This motor management system is used in various industries including Metal/Mining/Mineral, Oil & Gas, Water Wastewater.The LTMR27MFM controller measures a current range of 1.35-27A with a supply voltage of 100-240 Vac and uses CANopen as the communication protocol. It measures temperature, phase current, imbalance current, average current, and earth-fault current. The dimensions are 61 mm (H) X 91 mm (W) X 122.5 mm (D) and it weighs 0.53 kg.

The TeSys T is a comprehensive motor management system designed to enhance productivity and predictive maintenance. It supports multiple communication protocols including Modbus™, CANopen, DeviceNet™, Profibus™, Ethernet/IP, and Modbus/TCP. The system comprises several components such as the LTMR controller, expansion module, HMI, software, and various accessories.The LTMR controller is the primary component responsible for managing basic functions like measuring ground current, motor temperature, and three-phase current of the motor. It also includes logic inputs and outputs for fault management. The expansion module, connected directly to the controller, provides additional inputs and measures voltage between phases, enabling the controller to monitor additional functions.The TeSys T system is highly reliable with a long product life due to its state-of-the-art component selection, all-in-one design, and advanced electronic protection. It can be integrated into various harsh environments such as dusty atmospheres, marine applications, high vibration applications, and corrosive atmospheres.This motor management system is suitable for industries like Metal/Mining/Mineral, Oil & Gas, Water Wastewater. The LTMR controller measures a current range of 0.4-8A with a supply voltage of 100-240 Vac and uses Modbus as the communication protocol.The dimensions of this device are 61 mm (H) X 91 mm (W) X 122.5 mm (D) and it weighs 0.53 kg.

TeSys T is a motor management system that provides full motor monitoring, control, and protection when used with short circuit protection and a contactor. TeSys T manages most critical processes while reducing downtime and increasing productivity. TeSys T is a flexible system that integrates seamlessly into your automation system through five major communication protocols. TeSys T predicts what will happen in the process, as it accurately monitors current, voltage, and power over a wide range. This controller is the central component in the motor management system. The module manages the basic functions of the motor management system. It manages the measurement of 3 phase current via integral current transformers from 0.4 to 100 A or up to 810 A by external current transformers. It also measures ground current with internal or external ground sensors, motor temperature and the inputs and outputs for the various motor control modes, detected fault management and other functions. Ethernet/IP and Modbus/TCP protocol is used by this controller. Ethernet TCP/IP communication is used. This module has 6 discrete logic inputs, 3 relay logic outputs and a relay output for detected fault signaling overload relay. The current range of this controller is 5 to 100 amperes. 24 VDC is used to power this controller. Controller has the following certifications: UL, CSA NOM, ATEX, BV, EAC, RINA, LROS, DNV, ABS, GL, KERI, RMRoS, C-Tick and CCC.

This is an insulation accessory designed for use with Compact NSX 400/630 or EasyPact CVS 400/630. It provides a protective barrier against direct contact with power circuits, ensuring safety and compliance with electrical standards. Key Features: Mountable upstream and downstream of fixed, plug-in or withdrawable devices Meets IEC 60947-2 clearance distance requirements Provides IP40 degree of protection against dust and splashing liquids Offers IK07 mechanical impact protection

This is an insulation accessory for 3 poles Compact NSX 400/630 or EasyPact CVS 400/630. This long terminal shield protects against direct contact with power circuit It is used for front connection with cables or insulated bars. It can be mounted upstream and downstream of fixed, plug-in or withdrawable devices. It allows to reach the clearance distance requested by IEC 60947-2 standard. The pitch is 45mm. It provides IP40 degree of protection and IK07 mechanical impact protection.

This is a plug-in kit for 3 poles Compact NSX 400/630 fixed circuit breakers. A plug-in configuration is made by adding a plug-in kit to a fixed Compact NSX device. This kit includes a plug-in base (LV432516), 3 power connections (LV432518), 2 short terminal shields (LV432591) and a safety trip interlock (LV432520). A plug-in configuration allows to install or extract rapidly and easily the circuit breaker from its base. This operation can be done without connecting or disconnecting the power circuit.