Drives & Motors

The Altistart 22 soft starter is engineered for controlled starting of three-phase asynchronous motors connected in the supply line. Designed to accommodate motor power ratings ranging from 37 kW to 90kW, this device operates on a rated voltage between 230V and 500V AC with a current rating of 140A. It is suitable for a broad range of applications including centrifugal and piston pumps, fans, screw compressors, and various material handling systems, catering to both simple and complex machinery requirements. The Altistart 22's compact design enhances its versatility, enabling straightforward integration into diverse machine frames. An integrated bypass contact contributes to reduced operational noise and minimizes heat dissipation. Furthermore, compatibility with SoMove software streamlines configuration processes; facilitating rapid deployment of spare units through easy transfer of settings and parameters. By providing a gradual start-up sequence, this soft starter mitigates mechanical stress on connected equipment, thereby extending the service life of associated machinery.

The Schneider Electric Lexium 28 servo motor is part of the Lexium range, an offer of motion servo drives for machines from 0.05 to 4.5kW. This brushless servo motor offers a high moment of inertia with a maximum mechanical speed of 5000RPM and IP65 parallel keyed shaft without holding brake. It is equipped with a 20bit single-turn absolute encoder, optimized for speed of rotation (3000RPM). It is suitable for a wide variety of applications due to the different levels of motor inertia offered. The servo motor has a rated supply voltage of 220V, a continuous stall current of 4.01A and a continuous power of 750W. The shaft dimensions are 19mm (Diameter) x 35mm (Length). It is furnished with free lead for electrical connection. It is an IP50 (IM V3) and IP65 (IM B5, IM V1) rated product. Its dimensions are 138mm (Length) x 80mm (Width), centring collar dimensions are 4mm (Depth) x 70mm (Diameter) with 90mm circle diameter of the mounting hole. It weighs 2.9kg. This product is compatible with Lexium 28 and Lexium 26D servo drives. It supports Asian standard 80mm flange mount with a natural convection cooling system. The Lexium 28 and Lexium BCH2 servo bundles are cost effective, energy efficient and embedded safety.

Product Overview: The Schneider Electric Lexium 52 Servo Motor, Model SH30702P01A2000, is a high-performance motor designed for PacDrive 3 applications. It boasts a maximum mechanical speed of 8000 RPM and a smooth shaft end without holding brake. Key Features: Single-turn SinCos Hiperface® encoder with 128 periods speed feedback resolution Rated supply voltage of 115V to 480V Continuous stall current of 2.9A and continuous power of 1130W Rotatable right angled connectors for electrical connection IP54/IP65 rated for robust environmental protection Compatible with PacDrive 3 for motion centric machines Supports 70mm international standard flange mount with natural convection cooling system Weighs 2.8kg and has a length of 187mm Application: This servo motor is ideal for applications requiring high precision, speed, and reliability. It's part of the Lexium 52 & Motors range, offering a counterbalance to the Lexium 62 multi-axis servo system, making the PacDrive system one of the most flexible motion control solutions. Technical Specifications: Shaft dimensions: 11mm (diameter) x 23mm (length) Centering collar dimensions: 2.5mm (depth) x 60mm (diameter) with 82mm mounting hole Weight: 2.8kg

TeSys U Modbus communication splitter box with 10 x RJ45 connectors and 1 screw terminal block. On front side, it provides 8 x RJ45 connectors for tap-off and 2 x RJ45 connectors for daisy chain. On the underside, it provides a 4-point screw terminal block for Modbus trunk cable connection. To be clipped on a 35mm DIN rail or fixed by 2 screws on panel. Green Premium compliant (RoHS/REACh).

This Altistart 01 soft starter is DIN rail mounted and can feed 3-phase asynchronous motors with a rating up to 6A. This Altistart 01 can be used for a motor rated power up to 1.1kW or 1.5hp for 3-phase (200V to 240V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 45mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

The ATV320 variable speed drive operates at a rated power of up to 0.37 kW (0.5 hp) and supports a voltage range of 200V to 240V AC. Its compact design facilitates vertical stacking within machine frames, optimizing space utilization.With an operational capability at ambient temperatures of up to 60°C without additional cooling, this drive is engineered for harsh environments, featuring a robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards. It ensures high machine availability in challenging conditions.The drive incorporates advanced functionalities, such as torque and speed accuracy at low speeds, high dynamic performance through flux vector control without sensor feedback, and an extended frequency range for high-speed motors. It facilitates parallel motor connections and offers energy-saving modes for open-loop synchronous motors using voltage/frequency ratios.Equipped with five configurable safety functions, it meets essential safety standards, whether utilized independently or in conjunction with a Preventa safety module. Configuration and programming can be seamlessly managed via SoMove software.Designed primarily for Original Equipment Manufacturers (OEMs), it addresses both simple and complex application needs across various sectors, including packaging, material handling, textile, and mechanical actuation. Compliance with international standards such as IEC/EN 61800-5-1 and IEC/EN 61800-3 is ensured, along with certifications including CE, UL, and CSA.The ATV320 is compatible with external accessories and options, depending on the drive rating, and is designed for vertical mounting (+/- 10°) with four fixing holes. It integrates fully with Schneider Electric’s EcoStruxure Machine, enabling direct configuration, control, and diagnostics through SoMachine software using the same software brick (DTM).

The Altivar Machine ATV340 is a robust variable speed drive that can handle demanding applications. It's capable of driving both synchronous and asynchronous motors in open and closed loop control, with a rated power up to 22kW / 30hp and a voltage range from 380V to 480V AC. This drive is designed to withstand harsh conditions such as vibration, shock, non-conductive dust, and high temperatures up to 60 °C. It integrates Modbus serial line communication protocols as standard and weighs 10.2kg. The ATV340 comes with a wide range of features suitable for various applications including packaging, material handling, material working, and hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions), IEC 60721-3, IEC 61508, IEC 13849-1. It is also CE, UL, CSA, and TÜV certified. Accessories such as encoder interface modules, I/O expansion modules, communication modules, braking resistors, line chokes, additional EMC filters are available for this drive depending on the drive rating. The ATV340 is designed to be mounted in a vertical position (+/- 10 °) on a panel and is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It can be configured, controlled, and diagnosed directly in SoMachine and SoMove software by means of the same software brick (DTM).

The Schneider Electric TeSys Ultra Standard Control Unit is a versatile solution designed for use in power bases LUB12, LUB32, and LUB38 to form a TeSys U starter controller. This control unit is ideal for 3-phase motor applications with a rated current of 0.35A to 1.4A (adjustable). It offers full protection to motors, including overload tripping class 10, short circuit at 13 times the maximum current, and overcurrent at 14.2 times the rated current. Additionally, it provides phase loss and insulation fault protection for equipment.The control unit is compatible with a voltage range of 110-240V AC or 110-220V DC for the control of the starter through the control terminals A1/A2 located in the power base. It is certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), and Green Premium compliant (RoHS/REACh).

The Altivar Process ATV600 variable speed drive is an innovative solution that provides efficient power to 3-phase synchronous and asynchronous motors. It features multiple communication ports, including RJ45 and Ethernet, making it highly adaptable for various applications.This drive operates at a rated supply voltage from 380V to 480V AC, ensuring compatibility with a wide range of power sources. With its 'Stop and Go' operation, the ATV600 offers up to 30% energy savings when on standby, enhancing overall efficiency.Suitable for motors with power ratings up to 5.5kW / 7.5hp, this drive is ideal for applications requiring slight overload (up to 120%) or significant overload (up to 150%). It weighs 4.7kg and has dimensions of 144mm wide, 350mm high, and 203mm deep.The Altivar Process ATV600 is designed for fluids management processing and energy saving, making it a versatile choice for water and wastewater, mining, minerals and metals, oil and gas, and food and beverage applications. It can be mounted in a vertical position (+/- 10 °) on a wall.This drive supports the major needs of process and utilities in terms of equipment efficiency and total cost of ownership by offering energy management, asset management, and overall performance optimization for the process.

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The 10-pole servo motor features a medium moment of inertia with maximum mechanical speed of 8000RPM, smooth shaft and holding brake. It is equipped with a SinCos Hiperface® encoder (32768 points/turn) for automatic transmission of data from the servo motor to the servo drive. BMH servo motor is medium inertia motor, it is particularly suitable for high-load applications and allows the movement to be adjusted in a more robust manner. It is a synchronous servo motor with a rated supply voltage of 480V, a continuous stall current of 3.91A and a continuous power of 1.68W. The shaft dimensions are 14mm (Diameter) x 30mm (Length). It is furnished with rotatable right-angled connectors for electrical connection. It is an IP54 rated product. Its dimensions are 225mm (Length) x 70mm (Width), centring collar dimensions are 2.5mm (Depth) x 60mm (Diameter) with 82mm circle diameter of the mounting hole. It weighs 4kg. This product is compatible with Lexium 32 servo drives. It supports international standard 70mm flange mount with a natural convection cooling system. Encoder gives the absolute position of the motor so that flows can be synchronized and sends data from the servo motor to the servo drive, which provides automatic identification of the motor when the servo drive starts. BMH servo motor with a 3-phase stator and neodymium iron boron (NdFeB) magnets. Casing with RAL 9005 opaque black paint protective coating. 4-point axial mounting flange. Cables and connectors to be ordered separately.

This Altistart 01 soft starter is DIN rail mounted and can feed 3-phase asynchronous motors with a rating up to 9A. This Altistart 01 can be used for a motor rated power up to 1.5kW or 2hp for 3-phase (200V to 240V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 45mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

The TeSys Ultra Standard Control Unit is designed to be integrated with power bases LUB12, LUB32, and LUB38, forming a comprehensive TeSys U starter controller for three-phase motor applications. This control unit offers full protection to motors with adjustable rated current from 3A to 12A, overload tripping class 10, short circuit at 13 times the maximum current, and overcurrent at 14.2 times the rated current. It also provides protection against phase loss and insulation faults (equipment protection only). This control unit is compatible with a 110-240V AC or 110-220V DC voltage for controlling the starter through its A1/A2 control terminals located in the power base. It has been certified when used in conjunction with LUB power bases (IEC, UL, CSA, CCC, EAC, Marine), and it complies with Green Premium standards (RoHS/REACh).

SINAMICS g120 power module pm240-2 without filter with built in braking chopper 3AC380-480v +10/-10% 47-63HZ output high overload 7,5KW for 200% 3s,150% 57s,100% 240s ambient temp -10 to +50 deg c output low overload 11KW for 150% 3s,110% 57s,100% 240s ambient temp -10 to +40 deg c 355 x 140 x 165 (hxwxd), fsc protection IP20 without control unit and panel approved for firmware- version v4.6

Introducing the Altivar 320 variable speed drive, a versatile solution designed to power 3-phase synchronous and asynchronous motors. Its book form factor ensures a streamlined and space-efficient installation in your automation cabinets. With a rated power of up to 2.2kW / 3hp and a voltage range from 380V to 500V AC, this drive is designed for robustness and adaptability.The Altivar Machine ATV320 boasts an IEC 60721-3-3 class 3C3 coated printed circuit board, enabling it to operate effectively in harsh environmental conditions, even at ambient temperatures of up to 60°C without the need for additional cooling. This drive incorporates advanced features such as torque and speed accuracy at low speeds, high dynamic performance with flux vector control without sensors, and an extended frequency range for high-speed motors.The Altivar Machine ATV320 also supports parallel connections of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. It includes 5 safety functions, configurable via SoMove software, to meet safety requirements. These functions are designed to work seamlessly with or without a Preventa safety module.The Altivar Machine ATV320 is suitable for Original Equipment Manufacturers (OEMs) in various industries such as packaging, material handling, textile, material working, mechanical actuators, and hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 for immunity and conducted and radiated EMC emissions. It is also certified by CE, UL, CSA, NOM, EAC, and RCM.Mounting accessories and external options such as braking resistors, line chokes, motor chokes, and additional EMC filters are available for the Altivar Machine ATV320. The drive is designed to be mounted in a vertical position (+/- 10 °) on a panel, with 4 fixing holes. It is fully integrated into Schneider Electric’s EcoStruxure Machine through DTM and can be configured, controlled, and diagnosed directly via SoMachine and SoMove software using the same software brick (DTM).

The ATS01 soft starter is designed for 3-phase asynchronous motors, facilitating a smooth startup process while handling power ratings up to 3 kW or 3 hp at 200V to 240V AC. With a compact width of 45 mm, it is suitable for installation in space-constrained environments. Its integrated bypass feature minimizes noise and heat dissipation.This soft starter is equipped with simple configuration settings, allowing non-specialists to set it up effectively. Typical applications include conveyors, pumps, fans, compressors, and similar machinery, enhancing operational longevity by mitigating mechanical stress during startup. It complies with various standards, including EN/IEC 60947-4-2, and has multiple certifications such as C-tick, UL, and CSA.For ambient conditions, this device operates effectively in temperatures ranging from -10°C to 40°C without derating and can function up to 50°C with a specified current derating. The product is built to withstand environmental challenges, featuring an IP20 protection rating and vibration resistance suitable for industrial settings.

This product is part of the Lexium 62 & Motors range, an offer of servo drives. The double drive features SERCOS III physical interface. It offers 2 digital/2 touch probe inputs and 2 digital outputs. It is a double drive with a rated supply voltage of 24VDC, a continuous output current of 5A at 4kHz and a continuous power of 4.3kW. It is furnished with connectors for electrical connection. It is an IP20 rated product. It weighs 3kg. It is suitable for general machine control, packaging machine automation and material handling applications. This product is certified by CE, CSA, EAC, TUV and UL. It meets EN 62061, EN 61800-5-1, EN 61800-3, CSA C22.2 No 14, IEC 61508, UL 508C and EN/ISO 13849-1 standards. This product is compatible with servo motor SH3 (100mm, 3 motor stacks), servo motor SH3 (100mm, 4 motor stacks) and servo motor SH3 (140mm, 1 motor stack). It includes accessory kit. Lexium 62 multi-axis servo systems can be controlled with all PacDrive 3 LMC motion controllers of the Pro/Pro2 and Eco series via SERCOS communication. Multi axis servo drives and servo motors from 0.95kW to 24kW for PacDrive based automation solutions.

The Altivar 320 variable speed drive from Schneider Electric is designed for feeding 3-phase synchronous and asynchronous motors. Its compact book form factor allows for easy installation in automation cabinets. It operates at a rated power of up to 3kW / 4hp and a voltage range from 380V to 500V AC. The drive features IEC 60721-3-3 class 3C3 coated printed circuit boards, enabling it to operate in harsh environmental conditions such as ambient temperatures up to 60°C without the need for additional cooling.The Altivar 320 incorporates functions suitable for a wide range of applications, including high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also supports parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors.The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions can be configured using SoMove software. The Altivar Machine ATV320 was designed for Original Equipment Manufacturers (OEMs) that meet simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting.The Altivar 320 conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions) and is CE, UL, CSA, NOM, EAC and RCM certified. Mounting accessories and external options such as braking resistors, line chokes, motor chokes, additional EMC filters are available with Altivar Machine ATV320 drives. The drive can be mounted in a vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes.The Altivar 320 is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It can be configured, controlled, and diagnosed directly in SoMachine and SoMove software by means of the same software brick (DTM). The drive is eco-friendly and complies with directives such as RoHS, WEEE, etc. relating to environmental protection.

The SINAMICS G120C is a high-performance AC drive designed for industrial applications. It offers a rated power of 15.0KW with an impressive overload capability of 150% for up to 3 seconds. This drive operates at three-phase, 380-480V with a voltage range of +10/-20% and a frequency of 47-63Hz. It is equipped with an integrated filter class A I/O interface, providing 6 digital inputs (DI), 2 digital outputs (DO), 1 analog input (AI), and 1 analog output (AO). The drive also features the Safe Torque Off function for enhanced safety and comes with a PROFINET-PN fieldbus interface. It is protected according to IP20/UL standards, making it suitable for open type applications. The drive's size is FSC 295x140x203 (HxWxD), and it requires an external 24V power supply.

The Altivar Machine ATV320 variable speed drive is a robust solution capable of powering both synchronous and asynchronous 3-phase motors. Its compact design, featuring a book form factor, allows for easy installation within automation cabinets. It operates at a rated power of up to 0.55kW/0.75hp and a voltage range from 380V to 500V AC. The drive is designed to withstand harsh environmental conditions, such as ambient temperatures up to 60°C, without the need for additional cooling. It incorporates functions suitable for various applications, including torque and speed accuracy at low speeds, high dynamic performance with flux vector control, and extended frequency range for high-speed motors. The drive software includes five safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions can be configured using SoMove software. Altivar Machine ATV320 was designed for Original Equipment Manufacturers (OEMs) with simple and advanced application requirements covered in packaging, material handling, textile, material working, mechanical actuators, and hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions) and is CE, UL, CSA, NOM, EAC, and RCM certified. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The drive is designed to be mounted in a vertical position (+/- 10 °) on a panel, thanks to four fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM and can be configured, controlled, and diagnosed directly in SoMachine and SoMove software by means of the same software brick (DTM).

The Altistart 22 soft starter is engineered for the control of 3-phase asynchronous motors, providing a rated voltage range of 230V to 500V AC and a power range from 11kW to 30kW. With a starter rating of 47A, this unit is suitable for various applications, including centrifugal pumps, piston pumps, fans, and material handling systems.Its slim form factor enhances installation flexibility, allowing for mounting in various machine frames. An integrated bypass feature minimizes noise and heat generation, thus improving operational efficiency. Compatibility with SoMove software facilitates easy configuration, enabling swift installation of replacement units.This device ensures smooth starting, which reduces mechanical stress on motors, ultimately prolonging their operational lifespan. It adheres to multiple standards including IEC 60947-4-2, and is certified under GOST, CSA, UL, C-tick, and CCC, ensuring reliability across diverse environments.The Altistart 22 is optimally designed for operation within ambient air temperatures ranging from -10°C to 40°C without derating, and can withstand temperatures up to 60°C with a current derating of 2.2% per °C. It maintains functionality at altitudes up to 3280.84 ft (1000 m) without derating, with additional derating applied for higher altitudes.