Drives & Motors

The TeSys Ultra standard control unit is designed to be inserted in power bases LUB32, LUB32, LUB38 to create a TeSys U starter controller for 3-phase motor applications up to 7.5kW@400V. This unit provides comprehensive protection for motors with a rated current of 4.5A to 18A (adjustable), overload tripping class 10, short circuit at 13 times the maximum current, overcurrent at 14.2 times the rated current, phase loss, and insulation fault (protection of equipment only). It is compatible with a 24V DC voltage for control of the starter through the control terminals A1/A2 located in the power base.This product is certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), and it complies with Green Premium standards (RoHS/REACh).

The Schneider Electric TeSys Ultra Control Unit is designed to be inserted into advanced power bases such as LUB120, LUB320, and LUB380 to form a TeSys U starter controller. This unit is ideal for 3-phase motor applications up to [email protected] TeSys Ultra Control Unit offers full protection for motors with a rated current of 0.35A to 1.4A (adjustable), overload tripping class 10, short circuit at 13 times the maximum current, overcurrent at 14.2 times the rated current, phase loss, and insulation fault (protection of equipment only).The unit also provides a thermal overload alarm that can be used locally with a LUFDA module or remotely with a LULC module. It features a test push button for overload simulation.This control unit operates with a voltage range of 110-240V AC/110-220V DC for the control of the starter through the control terminals A1/A2 located in the power base. It is certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), and complies with Green Premium standards (RoHS/REACh).

The softstarter PSR25-600-70 has a rated maximum operational current of 25 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...240 V AC at 50/60 Hz. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN and a TOR signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

The softstarter PSTX72-600-70 has a rated maximum operational current of 72 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard.To interact with PSTX, it has a detachable full graphic display with IP66 and 4x outdoor rating. There are four ways to communicate with PSTX. It can be done by hardwire inputs Start/Stop/Reset of fault, and by three programmable digital inputs. Another popular option is the built-in Fieldbus communication Modbus RTU and incl optional ANYBUS modules with every major protocol such as for example Profinet, Profibus, Modbus TCP, Ethernet IP and others. Another way to communicate with PSTX is to use an external adaptor and a Fieldbus plug. PSTX is the complete alternative for any motor starting application. It’s suitable for medium to large-sized three-phase motors with nominal currents from 30...1250 A inline connection or 52...2160 A inside delta connection. Typical applications are, for example, pumps, fans, compressors, and conveyors.

This Altistart 48 soft start/soft stop unit is a controller with 6 thyristors used for torque-controlled soft starting and stopping of three-phase asynchronous motors. It offers soft starting and deceleration functions along with machine and motor protection functions, as well as functions for communicating with control systems. It works at a rated supply voltage from 208V to 690V AC and up to 140A rating. Altistart 48 torque control enables starting without mechanical stress and smooth control of hydraulic transitions, with a single acceleration ramp making adjustments is quick and easy, whatever the load. It is suitable for motors with power rating up to 125hp (at 575V) / 110kW (at 690V) for standards applications and 100hp (at 575V) / 90kW (at 690V) for severe applications. It weighs 12.4kg and its dimensions are, 200mm wide, 340mm high, 265mm deep. It is designed for use in the most common applications for centrifugal machines, pumps, fans, compressors and conveyors, which are primarily to be found in the construction, food and beverage and chemical industries. It complies with IEC/EN 60947-4-2 standard and is certified CE, UL, CSA, DNV, C-Tick, GOST, CCC, NOM, SEPRO, and TCF. The Altistart 48 is connected directly to the Modbus bus via its RJ45 connector port, It can also be connected to Ethernet, Fipio, Profibus DP and DeviceNet networks via a module (bridge or gateway) to order separately. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. Altistart 48 delivers high performance with its Torque Control System (TCS) for controlled starting and deceleration, an easy integration in enclosures and control systems. This range provides also continual improvement of your machine operation by reducing mechanical or hydraulic stress and limiting energy loss and temperature rise, plus more.

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The AC motion servo drive for one axis, features with an integrated EMC filter, compact drive with analogue inputs and pulse train. It provides 2 capture, 2 safety, 4 logic discrete inputs and 3 discrete outputs. Thanks to its compact design this servo drive enables to save on cabinet space and size, reduces the machine footprint and decreases costs. It is a motion servo drive with a rated supply voltage of 100V to 120V, 200V to 240V (single phase), a continuous output current of 3A at 8kHz and a continuous power of 900W at 230V. It is furnished with terminal for electrical connection and RJ45 connector for Modbus integrated communication interface. CANopen, CANmotion, Ethernet/IP, EtherCAT, Profibus, DeviceNet possible with option card. It is an IP20 rated product. Its dimensions are 68mm (Width) x 237mm (Depth) x 270mm (Height). It weighs 1.8kg. This product is certified by CE, CSA, RoHS, TUV and UL. It meets EN/IEC 61800-3 and EN/IEC 61800-5-1 standards. This product is compatible with servo motors BMH and BSH. Servo drive range with four servo drive models and two servo motor families plus an intelligent selection of options. It provides you with the drive and motor combination that has exactly the right power, performance and functionality.

The Siemens SIRIUS 3RW4454-6BC44 soft starter is a high-performance unit designed to provide smooth and controlled motor starting. This advanced device reduces mechanical stress and electrical surges during startup, extending the lifespan of your equipment.With impressive ratings at 400V and 40°C, the 3RW4454-6BC44 can handle up to 615 Amperes and 355 kW in standard operation. For root-3 configurations, its capacity significantly increases to 1065 Amperes and 630 kW. It is compatible with a wide main circuit voltage range of 200-460V AC and operates with a control supply voltage of 230V AC. Equipped with robust screw terminals, this Siemens soft starter ensures secure and straightforward wiring.Ideal for a broad spectrum of industrial applications requiring gentle and efficient motor acceleration and deceleration, the SIRIUS 3RW4454-6BC44 soft starter is a reliable choice for your equipment. However, please note that this product has been phased out, and its successor is the SIRIUS 3RW5. The preferred successor type is 3RW5552-6HA14.

The PSR16-600-70 Softstarter is designed to provide a smooth start and stop for small three-phase motors. With a rated maximum operational current of 16 A and an operating voltage range of 208...600 V AC, this softstarter ensures reliable performance in various applications.Key Features:Two-phase control soft start and stop through a voltage rampBuilt-in bypass for easy installation and energy savingRUN signal available from a relay output in NO (normally open state)Easy start/stop ramp and time setting with three potentiometers on the frontCompact design suitable for small three-phase motors with nominal currents from 3...105 ACan manage up to 100 starts per hourCommon applications include pumps, fans, compressors, and conveyors. The PSR16-600-70 Softstarter is often used in combination with a manual motor starter (MMS) from ABB, and mechanical connection kits are available. Fieldbus communication can be enabled by an external adaptor and a Fieldbus plug.

The SINAMICS V20 is a versatile and cost-effective drive solution designed for basic applications. With a rated power of 1.1 kW and the ability to handle 150% overload for 60 seconds, this drive ensures reliable performance even under demanding conditions. It operates within a voltage range of 380-480 V 3 AC with a frequency range of 47-63Hz, making it suitable for various industrial environments.This drive features multiple I/O options, including 4 digital inputs, 2 digital outputs, 2 analog inputs, and 1 analog output, providing flexibility for different control requirements. The integrated fieldbus supports USS/MODBUS RTU protocols, enabling seamless communication with other devices in your automation system.The built-in Basic Operator Panel (BOP) allows for easy setup and operation, while the IP20 protection ensures safe usage in controlled environments. The compact size of 90x166x145.5 mm (WxHxD) makes it easy to install in space-constrained applications.Compliance with international standards and directives, such as the RoHS directive and WEEE, ensures that the SINAMICS V20 meets environmental and safety requirements. This drive is a reliable choice for applications requiring basic drive functions with robust performance and easy integration.

This Altistart 01 soft starter is DIN rail mounted and can feed single or 3-phase asynchronous motors with a rating up to 12A. This Altistart 01 can be used for a motor rated power up to 5.5kW or 7.5hp for 3-phase (110V to 480V AC) and up to 1.5kW for single phase (110V to 230V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 45mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

The PSR72-600-70 softstarter boasts a rated maximum operational current of 72 A, accommodating a wide operating voltage span from 208...600 V AC. It is equipped with a two-phase control soft start and stop through a voltage ramp, ensuring smooth motor operation. The softstarter features an integrated bypass for easy installation and energy savings. A RUN and TOR signal is available from a relay output in NO (normally open state). The start/stop ramp and time can be easily set using three potentiometers on the front panel. This softstarter is often used in combination with a manual motor starter (MMS) from ABB, and mechanical connection kits are available. An alternative option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications include pumps, fans, compressors, and conveyors.

The HYBD DOL STARTER is a robust direct starter designed for high-voltage applications. It boasts a 3RM1 model with a voltage rating of 500 V and power handling capabilities ranging from 0.09 to 0.75 kW. This starter offers a current range of 0.4 to 2 A, operating at a DC voltage of 24 V. The screw-type connection system ensures secure and reliable electrical connections.This motor starter is equipped with SIRIUS 3RM1 direct starter technology, providing efficient and reliable operation. Its direct starter design allows for easy integration into existing systems, making it an ideal choice for industrial applications requiring high power handling capabilities.

The Softstarter PSR60-600-11 boasts a maximum operational current of 60 A, catering to an operating voltage range from 208 V to 600 V AC. Its rated control voltage is 24 V AC/DC.This device features a two-phase control soft start and stop through a voltage ramp, ensuring smooth motor operation. It also includes a built-in bypass for easy installation and energy savings. The PSR provides a RUN and TOR signal from a relay output in NO (normally open state).The start/stop ramp and time can be easily adjusted using three potentiometers on the front panel. This softstarter is often used in combination with an ABB manual motor starter (MMS), for which mechanical connection kits are available. Alternatively, Fieldbus communication can be enabled by an external adaptor and a Fieldbus plug.The PSR range represents our most compact softstarters, offering basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3 A to 105 A and can handle up to 100 starts per hour. Common applications include pumps, fans, compressors, and conveyors.

Experience the power of Siemens' S0 Load Feeder Fuseless Direct Start technology. This high-performance device is designed to handle a wide range of applications with its 9-12.5A capacity and 400V AC voltage rating. Key Features: Direct-on-line starting for efficient power delivery Fuseless design for reliable operation without fuses DC 24V screw terminal for easy installation on standard mounting rails Type of coordination 2, Iq = 150 kA for enhanced safety and reliability 1 NO+1 NC (contactor) for versatile use in various applications

The SIRIUS motor starter M200D technology module is designed to provide reliable and efficient motor control in a wide range of industrial applications. Key Features: Mechanical switching for AC-3 applications Rated at 0.75KW/400V Electronic overload protection Thermistor Options: THERMOCLICK / PTC without brake contact Connectivity and Manual Operation: 4 DI / 2 DO Han Q4/2 - Han Q8/0 with manual on-site operation and key-operated switch via communication module 3RK1305* Application: Can be used on PROFIBUS or PROFINET

The Siemens MicroMaster 440 Spare Part is a high-performance motor designed for industrial applications. It operates at a voltage range of 380-480V with a frequency of 47-63Hz, providing constant torque and efficient power transmission. The motor features an overload capacity of 150% for 60 seconds and 200% for 3 seconds, adhering to square-law torque characteristics. With dimensions of 245x185x195mm (HxWxD), this robust motor offers a degree of protection IP20 and can withstand ambient temperatures ranging from -10°C to +50°C without additional overload protection (AOP/BOP). This spare part is an essential component for maintaining the reliability and efficiency of your industrial machinery.

The softstarter PSTX45-600-70 has a rated maximum operational current of 45 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard.To interact with PSTX, it has a detachable full graphic display with IP66 and 4x outdoor rating. There are four ways to communicate with PSTX. It can be done by hardwire inputs Start/Stop/Reset of fault, and by three programmable digital inputs. Another popular option is the built-in Fieldbus communication Modbus RTU and incl optional ANYBUS modules with every major protocol such as for example Profinet, Profibus, Modbus TCP, Ethernet IP and others. Another way to communicate with PSTX is to use an external adaptor and a Fieldbus plug. PSTX is the complete alternative for any motor starting application. It’s suitable for medium to large-sized three-phase motors with nominal currents from 30...1250 A inline connection or 52...2160 A inside delta connection. Typical applications are, for example, pumps, fans, compressors, and conveyors.

TeSys island direct SIL starter, 3 poles, 80A/690V. Connected to a TPRBC bus coupler it controls, protects and monitors loads up to 80A and motors up to 37kW@400V / 40hp@480V. In association with a TPRSM001 module and an external safety device, it can be used for safety related systems conforming to IEC 61508. It provides motor protection functions including thermal overload (setting 4-80A, tripping class 5-30), phase loss, phase unbalance and reversal, long start (stall), locked rotor (jam), rapid cycle lockout, ground current detection. Monitoring of the load includes max/average voltages and currents, number of switching cycles, number of faults, active and reactive power/energy when associated to a TPRVM001 voltage module. Mounting on DIN rail together with the other modules of the TeSys island configuration. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHS/REACh).

SINAMICS G120 POWER MODULE PM240P-2 WITH BUILT IN CL. A FILTER 3AC380-480V +10/-20% 47-63HZ OUTPUT HIGH OVERLOAD: 18.5KW FOR 150% 60S. 100% 240S; AMBIENT TEMP -20 TO +50 DEG C (HO) OUTPUT LOW OVERLOAD: 22kW FOR 135% 3S. 110% 57S. 100% 240S AMBIENT TEMP -20 TO +40 DEG C (LO) 472 X 200 X 237 (HXWXD). FSD PROTECTION IP20 WITHOUT CONTROL UNIT AND PANEL APPROVED FOR CU FIRMWARE- VERSION V4.7 SP6 HF1

The SINAMICS G120 POWER MODULE PM240-2 is a high-performance and robust power component designed for the SINAMICS G120 modular drive system. It operates on a 3-phase AC supply of 380-480V (+10%/-20%) and a frequency range of 47-63Hz. This power module features an integrated Class A filter to reduce electromagnetic interference and a built-in braking chopper for efficient dissipation of regenerative energy.