Drives & Motors

Steel EdgeTM motors offer the widest range of electrical and mechanical features of any motor on the market today. Steel EdgeTM can be used on pumps, fans, compressors, general industrial belt drive, direct drive and direct-connected equipment where 12-lead, wye-start/delta-run is required. Steel EdgeTM is also available as an inverter duty motor, meeting both Parts 30 and 31 of NEMA MG-1 standards.

The servo motor, designated as BMH, is part of the Lexium 32 series and is designed for precise motion control applications. It achieves a maximum mechanical speed of 8000 RPM and incorporates a holding brake, ensuring stability during operation. The motor is equipped with a multiturn encoder that provides a speed feedback resolution of 32,768 points per turn over 4,096 turns, enhancing its performance in dynamic environments.With a continuous stall torque of 2.5 N.m and a peak stall torque of 7.4 N.m, this motor is suitable for demanding tasks including printing, packaging, and material handling. The nominal output power of 700 W at 400 V or 480 V, alongside a continuous power rating of 1.51 W, facilitates versatile usage across various systems. The motor features a keyed shaft end for secure coupling with compatible drive systems.The device is built to endure harsh conditions, rated IP65 for dust and water protection, and can achieve IP67 with the appropriate kit. It is designed for compatibility with Lexium 32 servo drives, ensuring seamless integration with existing motion control setups. The motor's physical specifications include a flange size of 70 mm and a weight of 3.3 kg, making it suitable for compact spaces.

SINAMICS g120c rated power 2,2KW with 150% overload for 3 sec 3AC380-480v +10/-20% 47-63HZ integrated filter class a i/o-interface 6di, 2do,1ai,1ao safe torque off integrated fieldbus PROFINET-pn protection IP20/ ul open type size fsaa 173x73x178(hxwxd) external 24v

The PSR45-600-70 Softstarter offers a rated maximum operational current of 45 A, with an operating voltage span from 208 V to 600 V AC. The control voltage is set between 100 V and 240 V AC at 50/60 Hz. This device features a two-phase control soft start and stop through a voltage ramp, ensuring smooth motor operation.The PSR45-600-70 Softstarter comes with built-in bypass for easy installation and energy saving. It also provides a RUN and a TOR signal from a relay output in NO (normally open state). The start/stop ramp and time can be easily set using three potentiometers on the front.This softstarter is often used in combination with a manual motor starter (MMS) from ABB, and mechanical connection kits are available. Alternatively, Fieldbus communication can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values, suitable for small three-phase motors with nominal currents from 3 to 105 A and capable of managing up to 100 starts per hour.Common applications include pumps, fans, compressors, and conveyors. The PSR45-600-70 Softstarter is a reliable choice for industrial automation systems requiring smooth motor operation and energy efficiency.

The ABB PSR25-600-11 Softstarter is designed for a rated maximum operational current of 25 A with an operating voltage range from 208 to 600 V AC. It features a two-phase control soft start and stop through a voltage ramp, along with built-in bypass for easy installation and energy savings. The device also includes a relay output in NO (normally open state) for RUN and TOR signals. The start/stop ramp and time can be easily set using three potentiometers on the front of the unit. The ABB PSR Softstarter is often used in combination with a manual motor starter (MMS), and mechanical connection kits are available for this purpose. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values, suitable for small three-phase motors with nominal currents from 3 to 105 A and capable of managing up to 100 starts per hour. Common applications for the ABB PSR Softstarter include pumps, fans, compressors, and conveyors.

Experience the power of the TeSys Island direct starter, a three-phase, 65A/690V device. This motor starter is designed to work seamlessly with a TPRBC bus coupler, providing comprehensive control, protection, and monitoring for loads up to 65A and motors up to 30kW@400V / 40hp@480V. This starter offers motor protection functions such as thermal overload (setting 3.35-65A, tripping class 5-30), phase loss, phase unbalance and reversal, long start (stall), locked rotor (jam), rapid cycle lockout, and ground current detection. It also includes load monitoring features like max/average voltages and currents, number of switching cycles, number of faults, active and reactive power/energy when associated with a TPRVM001 voltage module. This starter is designed for easy mounting on DIN rail alongside other TeSys island modules. This product is multi-standard certified (IEC, UL, CSA, CCC, EAC) and Green Premium compliant (RoHS/REACh).

Extend the life of your HVAC equipment, while keeping energy costs at bay, with a U.S. MOTORS® brand HVAC motor from Nidec Motor Corporation. You can count on our HVAC motors to deliver the power you need to maintain indoor air comfort, reliably and efficiently. Whether you are looking for a high-speed blower motor to drive an air conditioning system or a lower-speed option for heating and air circulation, you will find a reliable U.S. MOTORS brand HVACR motor engineered for optimal performance. From the advanced technology of variable speed electronically commutated motors to market-leading NEMA Premium®† efficient motors, U.S MOTORS brand HVAC motors are industry leaders. The extensive U.S. MOTORS product line includes HVAC motors for OEMs as well as replacement motors for major OEM equipment. Our online tools will help you find the best HVACR motor for your needs quickly. Whether you want to heat things up or stay cool, your motor search ends here.

TeSys U standard reversing power base, 3 poles (3NO), rated 12A/690V, to be completed with a control unit LUC to form a TeSys U reversing starter controller, for 3-phase motor applications up to 5.5kW@400V. Base composed of power contacts, control coil, rotary handle, with a modular design for additional modules to form a "all in one" reversing starter controller with basic or advanced protection and control functions. It is equipped with a reverser module LU2MB0FU to be supplied with 110-240V AC / 110-220V DC, auxiliary signaling contacts (1NO+1NC), a control terminal block, blanking shutters covering the empty cavities. It provides a high breaking capacity Icu 50kA@400V, start-stop control guaranteed for 3600 cycles/hour. Very compact (45mm width), DIN-rail mounting and screw fixing, with a padlockable rotary handle. Certified when used in conjunction with a LUC control unit (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

TeSys LRD thermal overload relay, 6A/690V, thermal setting range 4-6A, tripping class 10A, for protection of 3-phase motors 2.2kW@400V. Differential device with phase failure and load unbalance detection. It provides a thermal adjustement dial, a manual-automatic reset selector, a test selector for simulation of a tripping, reset and stop buttons, a flag indicator and 2 auxiliary contacts 1NO+1NC for fault signalling. Settings are protected by a transparent cover lockable by sealing. Connection by screw clamp terminals, it connects directly to the bottom terminals of 3-pole contactors LC1D09-D38. Mounting on DIN rail or screw fixing, separated from the contactor, with use of a terminal block LAD7B106 (to be ordered separately). Multi standards certified (IEC, UL, CSA, CCC, EAC, ATEX, Marine), Green Premium compliant (RoHs/Reach).

Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 2.4 A output current, with 24 V DC control voltage, adjustable overload shutdown and emergency stop function to SIL 3/PL e and, screw connection.

TeSys island direct SIL starter, 3 poles, 25A/690V. Connected to a TPRBC bus coupler it controls, protects and monitors loads up to 25A and motors up to 11kW@400V / 15hp@480V. In association with a TPRSM001 module and an external safety device, it can be used for safety related systems conforming to IEC 61508. It provides motor protection functions including thermal overload (setting 0.5-25A, tripping class 5-30), phase loss, phase unbalance and reversal, long start (stall), locked rotor (jam), rapid cycle lockout, ground current detection. Monitoring of the load includes max/average voltages and currents, number of switching cycles, number of faults, active and reactive power/energy when associated to a TPRVM001 voltage module. Mounting on DIN rail together with the other modules of the TeSys island configuration. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHS/REACh).

Altivar Machine ATV12 is an offer of variable speed drives for commercial equipment and simple machines. It works at a rated power up to 0.75kW / 1hp and a rated voltage from 200V to 240V AC. It is designed on a base plate for mounting on the machine frame. The frame surface area should allow heat to dissipate. It has advanced PID and catch on the fly functions, basic cabling, and easy motor control setting. Based on the needs, it can be delivered without heatsink, with embedded EMC filter, or as standard version. The Altivar 12 drive integrates as standard the Modbus communication protocol. This Altivar Machine ATV12 is designed for simple applications, in industry, commercial machines and HVAC machines such as conveyors, pumps, extractors, access barriers and treadmills. It conforms to IEC, UL and other international standards. SoMove software compatibility enables saving and transfering of configurations to spare drive, reducing maintenance downtime. It features an optimized application of power and torque for ventilation and pumping applications, this allows up to 30% energy savings. The ATV12 range meets basic machine requirements united with simplicity.

ET 200PRO EDSE/DSSE HF ELECTRONIC DIRECT STARTER ELECTRONIC (SOFT) SWITCHING FULL MOTOR PROTECTION COMPRISING: ELECTRONIC OVERLOAD PROTECTION + THERMISTOR 3 AC 400V/0.9KW; 0.9A...2.00A; W/O BRAKE CONTACT 4DI HAN Q4/2 - HAN Q8/0

The SIRIUS motor starter M200D is equipped with AS-Interface communication for seamless integration into automation systems. It features a reversing function and mechanical switching AC-3 with a power rating of 0.75KW / 400 V, supporting currents from 0.15 A to 2.00 A.The starter provides electronic overload protection and is equipped with a thermistor for enhanced safety. The brake contact ensures smooth stopping of the motor. It also supports 4 DI/1 DO AS-i Han Q4/2 - Han Q8/0, enabling manual on-site operation and key-operated switch.

The SIMATIC S7-400 Interface Module IF963-X27 is designed to provide a robust and reliable connection between the SIMATIC S7-400 system and the CP441 AB CP 441- AA05. This module features an RS422/RS485 interface, which allows for point-to-point (PTP) coupling with the CP441 AB CP 441- AA05. Technical Specifications: Model: IF963-X27 Interface: RS422/RS485 Coupling Type: Point-to-Point (PTP) Compatibility: CP441 AB CP 441- AA05

This product is part of the Lexium 28 range, an offer of motion servo drives for machines from 0.05 to 4.5kW. The brushless servo motor features a high moment of inertia with maximum mechanical speed of 5000RPM and IP65 parallel keyed shaft without holding brake. It is equipped with a 20bit single-turn absolute encoder, optimized in terms of speed of rotation (3000RPM). It is a second generation servo motors suitable for a wide variety of applications due to the different levels of motor inertia offered. It has a rated supply voltage of 220V, a continuous stall current of 2.19A and a continuous power of 400W. The shaft dimensions are 14mm (Diameter) x 30mm (Length). It is furnished with free lead for electrical connection. It is an IP50 (IM V3) and IP65 (IM B5, IM V1) rated product. Its dimensions are 129mm (Length) x 60mm (Width), centring collar dimensions are 5.5mm (Depth) x 50mm (Diameter) with 70mm circle diameter of the mounting hole. It weighs 1.45kg. This product is compatible with Lexium 28 and Lexium 26D servo drives. It supports Asian standard 60mm flange mount with a natural convection cooling system. Lexium 28 and Lexium BCH2, the optimized servo bundle for all motion control solutions are cost effective, energy efficient and embedded safety. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.

This product is part of the Lexium range, an offer of motion servo drives and servo motors. The 8-pole AC servo motor features a low moment of inertia with a maximum mechanical speed of 6000RPM and IP65 smooth shaft without holding brake. It is equipped with a single-turn (131072 points/turn) SinCos Hiperface® high-resolution absolute encoder giving an angular shaft position precise to less than ±1.3 arc minutes. BSH servo motor satisfies requirements for precision and high dynamic performance, due to the low rotor inertia. It is compact, and offers a high power density.Key Features:Low moment of inertiaMaximum mechanical speed of 6000RPMIP65 smooth shaft without holding brakeSingle-turn SinCos Hiperface® high-resolution absolute encoderCompact design with high power densityApplications:Precision machineryAutomation systemsRoboticsPackaging machines

Steel EdgeTM motors offer the widest range of electrical and mechanical features of any motor on the market today. Steel EdgeTM can be used on pumps, fans, compressors, general industrial belt drive, direct drive and direct-connected equipment where 12-lead, wye-start/delta-run is required. Steel EdgeTM is also available as an inverter duty motor, meeting both Parts 30 and 31 of NEMA MG-1 standards.

Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 2.4 A output current, with 24 V DC control voltage, adjustable overload shutdown, emergency stop function to SIL 3/PL e, and push-in connection.

The Schneider Electric Lexium 52 Servo Motor, Model SH31002P02F2100, is a high-performance servo motor designed for use with PacDrive 3. This 4-pole servo motor offers a maximum mechanical speed of 6000 RPM and features a smooth shaft end with holding brake. Equipped with an absolute multi-turn SinCos Hiperface® encoder, this servo motor provides 128 periods speed feedback resolution. It operates on a rated supply voltage of 115V to 480V, offering a continuous stall current of 4.8A and a continuous power of 1900W. The shaft dimensions are 19mm (diameter) x 40mm (length), and it comes with rotatable right angled connectors for electrical connection. This IP65 rated product is 234.5mm in length, with a centering collar measuring 3.5mm (depth) x 95mm (diameter) and a 115mm mounting hole. Weighing 6.3kg, this servo motor is compatible with PacDrive 3 for motion centric machines. It supports the 100mm international standard flange mount with a natural convection cooling system. The Lexium 52 range provides an ideal counterbalance to the Lexium 62 multi-axis servo system, making the PacDrive system one of the most flexible motion control solutions. Schneider Electric's Lexium Stand alone servo drives are available from 0.4kW and 7kW for PacDrive based automation solutions.