Electric Motors

The Lexium range offers motion servo drives and servo motors, including the 8-pole AC servo motor. This product features a low moment of inertia with a maximum mechanical speed of 6000RPM and an IP54 parallel keyed shaft without holding brake. It is equipped with a single-turn (131072 points/turn) SinCos Hiperface® high-resolution absolute encoder, providing an angular shaft position precise to less than ±1.3 arc minutes. The BSH servo motor satisfies requirements for precision and high dynamic performance due to its low rotor inertia. The servo motor is compact and offers a high power density. It is a synchronous servo motor with a supply voltage of 480V, a continuous stall current of 6.2A, and a maximum continuous power of 3.64W. The shaft dimensions are 24mm (Diameter) x 50mm (Length). It is furnished with rotatable right-angled connectors for electrical connection. The product is an IP50 rated servo motor with dimensions of 276.5mm (Length) x 100mm (Width), centring collar dimensions of 3.5mm (Depth) x 95mm (Diameter) with a 115mm circle diameter of the mounting hole. It weighs 9.5kg. This servo motor is compatible with Lexium 32, Lexium 05, and Lexium 15 servo drives. It supports international standard 100mm flange mount with a natural convection cooling system. The encoder gives the absolute position of the motor so that flows can be synchronized and sends data from the servo motor to the servo drive, which provides automatic identification of the motor when the servo drive starts. The BSH servo motor features a 3-phase stator and neodymium iron boron (NdFeB) magnets. The casing is coated with RAL 9005 opaque black paint protective coating. It has a 4-point axial mounting flange. Cables and connectors are to be ordered separately.

TeSys LRD thermal overload relay, 6A/690V, thermal setting range 4-6A, tripping class 10A, for protection of 3-phase motors 2.2kW@400V. Differential device with phase failure and load unbalance detection. It provides a thermal adjustement dial, a manual-automatic reset selector, a test selector for simulation of a tripping, reset and stop buttons, a flag indicator and 2 auxiliary contacts 1NO+1NC for fault signalling. Settings are protected by a transparent cover lockable by sealing. Connection by screw clamp terminals, it connects directly to the bottom terminals of 3-pole contactors LC1D09-D38. Mounting on DIN rail or screw fixing, separated from the contactor, with use of a terminal block LAD7B106 (to be ordered separately). Multi standards certified (IEC, UL, CSA, CCC, EAC, ATEX, Marine), Green Premium compliant (RoHs/Reach).

TeSys D pre-assembled star-delta starter, for motor control applications up to 25kW@400V in delta connection. Plate mounted starter, open version, composed of 3 contactors LC1D with 230V 50/60Hz AC coils, 1NC built-in auxiliary contact on star, a time-delay contact block 1-30 sec. For operating rates until 30 starts/hour, maximum starting time 30 sec. Compact assembly (165mm width), screw fixing. Equipped with pre-wired star delta power connections, and mechanical interlock, the use of a thermal overload relay (to be ordered separately) is strongly recommended. Green Premium compliant (RoHS/REACh).

TeSys D pre-assembled star-delta starter, for motor control applications up to 11kW@400V in delta connection. Plate mounted starter, open version, composed of 3 contactors LC1D with 230V 50/60Hz AC coils, 1NC built-in auxiliary contact on star, a time-delay contact block 1-30 sec. For operating rates until 30 starts/hour, maximum starting time 30 sec. Compact assembly (144mm width), screw fixing. Equipped with pre-wired star delta power connections, and mechanical interlock, the use of a thermal overload relay (to be ordered separately) is strongly recommended. Green Premium compliant (RoHS/REACh).

TeSys T is a motor management system that provides full motor monitoring, control, and protection when used with short circuit protection and a contactor. TeSys T manages most critical processes while reducing downtime and increasing productivity. TeSys T is a flexible system that integrates seamlessly into your automation system through five major communication protocols. TeSys T predicts what will happen in the process, as it accurately monitors current, voltage, and power over a wide range. TeSys T has a number of components that increase the flexibility of the system. This expansion module adds functionalities to the TeSys T controller. It adds voltage mesurement between phases up to 690 V nominal and 4 additional inputs. Module has 4 discrete logic inputs. 24 VDC is used to power the module. Module has the following certifications: UL, CSA NOM, ATEX, BV, EAC, RINA, LROS, DNV, ABS, GL, KERI, RMRoS, C-Tick and CCC.

TeSys T is a motor management system that provides full motor monitoring, control, and protection when used with short circuit protection and a contactor. TeSys T manages most critical processes while reducing downtime and increasing productivity. TeSys T is a flexible system that integrates seamlessly into your automation system through five major communication protocols. TeSys T predicts what will happen in the process, as it accurately monitors current, voltage, and power over a wide range. This controller is the central component in the motor management system. The module manages the basic functions of the motor management system. It manages the measurement of 3 phase current via integral current transformers from 0.4 to 100 A or up to 810 A by external current transformers. It also measures ground current with internal or external ground sensors, motor temperature and the inputs and outputs for the various motor control modes, detected fault management and other functions. DeviceNet protocol is used by this controller. This module has 6 discrete logic inputs, 3 relay logic outputs and a relay output for detected fault signaling overload relay. The current range of this controller is 0.4 to 8 amperes. 24 VDC is used to power this controller. Controller is 2.40 inches tall, 3.58 inches wide and 4.82 inches deep. Controller weighs 1.17 lbs. Controller has the following certifications: UL, CSA NOM, ATEX, BV, EAC, RINA, LROS, DNV, ABS, GL, KERI, RMRoS, C-Tick and CCC.

The TeSys T is a comprehensive motor management system designed to optimize motor performance and minimize downtime. It offers advanced monitoring capabilities for current, voltage, and power across a wide range of conditions. This flexible system supports six communication protocols including Modbus™, CANopen, DeviceNet™, Profibus™, Ethernet/IP, and Modbus/TCP.The TeSys T motor management system is composed of several components such as the LTMR controller, expansion module, HMI and software, along with various accessories. The LTMR controller serves as the main component, managing basic functions like ground current measurement, motor temperature monitoring, and three-phase current measurement. It also includes logic inputs and outputs for fault management.The expansion module is directly connected to the controller, providing additional inputs and voltage phase measurements to enhance monitoring capabilities. The TeSys T system boasts high reliability and a long product life due to its advanced component selection, all-in-one design, and robust electronic protection.This operator control unit can be integrated into various harsh environments such as dusty atmospheres, marine applications, high vibration applications, and corrosive atmospheres. It is commonly used in industries like Metal/Mining/Mineral, Oil & Gas, Water Wastewater.The TeSys operator control unit is designed to work with the LTMR controller for parameter configuration, information display, fault detection, and local motor control. It features an LCD screen, five control keys, four LED indicators, and two RJ45 connectors for PC and controller connection.With dimensions of 70 mm (H) x 117 mm (W) x 50 mm (D), this device weighs 0.4 kg.

TeSys T is a motor management system that provides full motor monitoring, control, and protection when used with short circuit protection and a contactor. It manages most critical processes while reducing downtime and increasing productivity as well as predicts what will happen in the process, as it accurately monitors current, voltage, and power over a wide range. This motor management system is also a flexible system that supports six communication protocols which are Modbus™, CANopen, DeviceNet™, Profibus™, Ethernet/IP, and Modbus/TCP. TeSys T motor management system consist of several components which include the LTMR controller, the expansion module, HMI and software along with several accessories. The LTMR controller is the main component of the system that manages the basic functions. This includes the measurement of the ground current, motor temperature, three phase current of the motor, the controller also includes logic inputs and outputs which is used in fault management. The expansion module is directly connected to the controller and provides additional inputs as well as measure the voltage between the phases which allow the controller the monitor additional functions. TeSys T is highly reliable and has a very long product life thanks to a state-of-the-art component selection, to the all in one design and to the advanced electronic protection. TeSys T can be integrated in many different types of harsh environment such as dusty atmospheres, marine applications, high vibration applications and corrosive atmospheres and is used in Metal/Mining/Mineral, Oil & Gas, Water Wastewater. This is a TeSys T LTMR controller that measure current range of 5-100A with a supply voltage of 100-240 Vac and uses EtherNet/Modbus TCP/IP as the communication protocol. This controller measures temperature, phase current, imbalance current, average current and earth-fault current. The dimensions of this device are 61 mm (H) X 91 mm (W) X 122.5 mm (D) and it weighs 0.53 kg. Controller has the following certifications: UL, CSA NOM, ATEX, BV, EAC, RINA, LROS, DNV, ABS, GL, KERI, RMRoS, C-Tick and CCC.

The TeSys T motor management system provides comprehensive motor monitoring, control, and protection capabilities when integrated with short circuit protection devices and contactors. Designed to optimize critical processes while minimizing downtime and maximizing productivity, the TeSys T system offers seamless integration into existing automation architectures through support for five key communication protocols. The TeSys T platform facilitates proactive process management via precise monitoring of current, voltage, and power across a broad operational range. To further enhance system flexibility, a variety of components are available, including this expansion module. This extension module provides additional functionality to the TeSys T controller, incorporating four discrete logic inputs alongside voltage measurement capabilities between phases up to 690 V nominal. The module operates on a power supply ranging from 120 to 240 VAC. Certified to meet rigorous industry standards including UL, CSA NOM, ATEX, BV, EAC, RINA, LROS, DNV, ABS, GL, KERI, RMRoS, C-Tick and CCC.

The Schneider Electric TeSys T is a robust motor management system designed to enhance productivity and predictive maintenance. It offers a wide range of features including current, voltage, and power monitoring, as well as support for six communication protocols: Modbus™, CANopen, DeviceNet™, Profibus™, Ethernet/IP, and Modbus/TCP.The system is composed of several components, including the LTMR controller, expansion module, HMI, and software. The LTMR controller manages basic functions such as ground current measurement, motor temperature monitoring, and three-phase current measurement. It also includes logic inputs and outputs for fault management.The expansion module provides additional inputs and measures voltage between phases, enhancing the system's capabilities. The TeSys T is highly reliable with a state-of-the-art component selection, all-in-one design, and advanced electronic protection, ensuring a long product life. It is suitable for various harsh environments such as dusty atmospheres, marine applications, high vibration applications, and corrosive atmospheres.This motor management system is used in industries like Metal/Mining/Mineral, Oil & Gas, Water Wastewater. The TeSys T LTMR controller specifically measures a current range of 0.4-8A with a supply voltage of 100-240 Vac and uses EtherNet/Modbus TCP/IP as the communication protocol. It measures temperature, phase current, imbalance current, average current, and earth-fault current.The dimensions of this device are 61 mm (H) X 91 mm (W) X 122.5 mm (D) and it weighs 0.53 kg. The controller is certified under various standards including UL, CSA NOM, ATEX, BV, EAC, RINA, LROS, DNV, ABS, GL, KERI, RMRoS, C-Tick and CCC.

This stepper motor, part of the Lexium SD3 series, is engineered for precise motion control. It operates with a 3-phase configuration, delivering a rated current of 5.8A and a supply voltage range of 34V DC to 48V DC. The motor’s specifications include a mechanical speed of up to 3000 RPM and a nominal torque of 1.5 Nm, ensuring effective performance in various applications.Measuring 79 mm in length with an 8 mm shaft diameter and a centering collar of 38 mm, this unit has a smooth shaft end and is devoid of a holding brake. The design allows for a service life of approximately 20,000 hours, supported by a robust IP56 protection rating, making it suitable for diverse environments including the textile, food and beverage, and packaging industries. The motor is compliant with EN 50347 and IEC 60072-1 standards.For thermal management, it employs a natural convection cooling system, and its operational parameters include an ambient temperature range of -25°C to 40°C and a relative humidity tolerance of 15% to 85% without condensation. The motor's construction features four mounting holes with a diameter of 5.2 mm and a circle diameter of 66.6 mm for secure installation.In terms of mechanical capabilities, it can withstand a maximum radial force of 50 N at the first shaft end and 40 N at the second end, along with a maximum axial force of 100 N. With a rotor inertia of 0.38 kg.cm², this stepper motor is compatible with Lexium SD3 motor drives, ensuring a quick setup and application readiness.

This product is part of the Lexium SD3 and motors an offer of 3-phase stepper drives and stepper motors. The 6-pole stepper motor features 14mm smooth shaft, centring collar of 60mm, without holding brake and second shaft end. It provides a high holding torque, that makes it an optimum solution in applications such pick and place, etc. It is a 3-phase stepper motor with a rated current of 2.25A, a mechanical speed of 3000RPM and a supply voltage of 230V AC, 325V DC. It is furnished with terminal box for electrical connection. The shaft dimensions are 14mm (Diameter) x 30mm (Length). It offers service life of about 20000h (bearing). It is an IP41 and IP56 rated product. Its dimensions are 171mm (Length) x 85mm (Width), centring collar dimensions are 2mm (Depth) x 60mm (Diameter) with 98.99mm circle diameter of the mounting hole. It weighs 4.3kg. This stepper motor is particularly suitable for short-distance positioning, such as labelling. It meets EN 50347 and IEC 60072-1 standards. This stepper motor is compatible with Lexium SD3 stepper drives. It supports 85mm flange mount a natural convection cooling system, 4 mounting holes with 6.5mm diameter. The SD3 is an universally applicable stepper motor drive. The package is ready for operation within a very short period of time. Connect the stepper motor to the drive, set the current and step resolution. The 3-phase stepper motor with a very high-power density. It carries out precise step-by-step movements that are controlled by a drive. The 3-phase stepper motor is accurate, powerful and sturdy and excel with a high-power density.

The servo motor BSH, classified under the Lexium 32 series, is designed for precise motion control applications. It supports a maximum mechanical speed of 10000 RPM, and operates without a holding brake, featuring a smooth shaft end. This motor incorporates an absolute multi-turn encoder with 16 sinusoidal periods per turn, ensuring high accuracy and feedback resolution of 32768 points per turn multiplied by 4096 turns.With a rated supply voltage of 400V and a continuous stall current of 1.12A, it provides robust performance suitable for various applications in printing, packaging, handling, clamping, and material processing. The overall dimensions include a flange size of 40x40mm, making it compatible with international standard mounting configurations.This motor has a net weight of 4.3 kg and is equipped with rotatable right-angled connectors for electrical connections. Additionally, it is rated IP65, ensuring protection against dust and water ingress. The Lexium 32 range is fully compatible with specific servo drives, such as LXM32nU45M2 and LXM32nU60N4, along with pre-assembled cables with connectors, type VW3M5nnnn. Compliance with EN 61800-5-1 2007 and other relevant standards affirms its suitability for various industrial applications.

This BMP synchronous motor has a power rating of 0.55kW and works at a rated supply voltage 230V. It is designed with latest magnetic materials and an optimized design, result in shorter length at a comparable torque. It has maximum mechanical speed of 3600 rpm and its protection index is IP65. It is compatible with Altivar 32 and Altivar machine ATV320 variable speed drives. It is also RoHS compliant.

The BSH Lexium 32 Servo Motor is a powerful addition to the Lexium 32 & Motors range, providing servo motors from 0.4kW to 6kW.This 6-pole AC servo motor boasts a low moment of inertia and features a keyed shaft with holding brake. It is equipped with a multi-turn (1,31,072 points/turn x 4096 turns) SinCos Hiperface® high resolution absolute encoder.With a supply voltage of 480V and a maximum continuous power of 1.06W, this servo motor is designed for precision and reliability. Its shaft dimensions are 11mm (diameter) x 23mm (length), and it comes with straight connectors for electrical connection.Rated to IP50 standards, the BSH Lexium 32 Servo Motor is built to withstand harsh environments. It weighs 2.3kg and has a length of 179.5mm, with centering collar dimensions of 2.5mm (depth) x 60mm (diameter) and an 82mm mounting hole.Compatible with Lexium 32, Lexium 15, and Lexium 05 servo drives, this motor is also compatible with LXM05AD10M2 at 200V to 240V single phase. It supports the 70mm international standard flange mount with a natural convection cooling system.The Lexium 32 range of servo drives offers drive and motor combinations that deliver the right power, performance, and functionality for your needs. This range includes four servo drive models with power ratings from 0.15kW to 11kW and the servo motor ranges BMH and BSH series.

This product is part of the PacDrive 3 range, an offer of integrated servo motors for machines from 0.31kW to 1.91kW. The 6-pole integrated servo motor features 3 stacks with a maximum mechanical speed of 6000RPM, a continuous rated stall torque 2.2Nm and smooth shaft. It is an equipped with a multi-turn SinCos Hiperface® absolute encoder (128 periods per revolution) with holding brake. It is an integrated servo motor with a supply voltage of 250V to 700V, a continuous stall current of 3A and a maximum continuous power of 0.72kW. The shaft dimensions are 14mm (diameter) x 30mm (length). It is an IP54 rated product. The length of this product is 293mm and the centering collar dimensions are 2.5mm (depth) x 60mm (diameter) with 82mm mounting hole. It weighs 4.7kg. It is suitable for use in general machine control, packaging machine automation, material handling applications. It supports international standard 70mm flange mount with a natural convection cooling system. Lexium 62 ILM integrated servo modules can be controlled with all PacDrive LMC Eco and Pro/Pro 2 series motion controllers via SERCOS communication. Multiaxis integrated servo drives from 0.31kW to 1.91kW for automation solutions based on PacDrive 3.

This product is part of the PacDrive 3 range, an offer of integrated servo motors for machines from 0.31kW to 1.91kW. The 8-pole integrated servo motor features 3 stacks with a maximum mechanical speed of 3000RPM, a continuous rated stall torque of 5.8Nm, and a parallel keyed shaft. It is equipped with a single-turn SinCos Hiperface® absolute encoder (128 periods per revolution) without a holding brake. It is an integrated servo motor with a supply voltage of 250V to 700V, a continuous stall current of 3.6A, and a maximum continuous power of 1.1kW. The shaft dimensions are 19mm (diameter) x 40mm (length). It is an IP54 rated product. The length of this product is 285mm and the centering collar dimensions are 3.5mm (depth) x 95mm (diameter) with 115mm mounting hole. It weighs 8.1kg. It is suitable for use in general machine control, packaging machine automation, and material handling applications. It supports international standard 100mm flange mount with a natural convection cooling system. Lexium 62 ILM integrated servo modules can be controlled with all PacDrive LMC Eco and Pro/Pro 2 series motion controllers via SERCOS communication. Multiaxis integrated servo drives from 0.31kW to 1.91kW for automation solutions based on PacDrive 3.

This device is categorized within the Lexium ILA, ILE, ILS range, designed for integrated motion control solutions. The motor operates at a nominal speed of 4800 rpm at 24V and 6000 rpm at 36V, providing a consistent nominal torque of 0.26 Nm across both voltages.Constructed without a gearbox and holding brake, this motor incorporates a BLDC encoder for feedback. It features a transmission rate of 125, 250, and 500 kbauds, enhancing its communication capabilities. The electrical connection is established via an industrial connector, ensuring robust integration into various systems.With a motor flange size of 66 mm and four mounting holes of 4.4 mm diameter, it accommodates a circle diameter of 73.54 mm. Weighing in at 1.4 kg, it is designed for easy installation and alignment, complying with IEC 60034-7 standards for multiple mounting positions.This product is certified by CUL, TÜV, and UL, enabling reliability in diverse operational environments. The permissible ambient temperature ranges from 0 to 40 °C without derating, and 40 to 55 °C with power derating of 2% per °C. It also meets stringent environmental regulations, being mercury-free and PVC-free, thus qualifying as a Green Premium product.

The TeSys U control unit is a versatile solution that can be integrated into advanced power bases such as LUB120, LUB320, and LUB380 to create a comprehensive starter controller. This unit is ideal for 3-phase motor applications with a maximum power of 5.5kW at 400V. It provides robust protection to motors with adjustable rated current from 3A to 12A, overload tripping class 20, and short circuit protection up to 13 times the maximum rated current. The unit also offers an overcurrent protection of 14.2 times the rated current, phase loss detection, and insulation fault protection (equipment protection only).For enhanced safety, the TeSys U control unit includes a thermal overload alarm that can be used locally with a LUFDA module or remotely with a LULC module. It also features a test push button for simulating overload conditions. The unit operates on a voltage range of 110-240V AC/DC, making it suitable for various power bases.This product is certified under IEC, UL, CSA, CCC, EAC, and Marine standards when used with a LUB power base. It is also compliant with Green Premium standards (RoHS/REACh).

TeSys U control and diagnostic unit to be inserted in advanced power bases LUB120, LUB320, LUB380 to form a TeSys U starter controller, for 1-phase motor applications up to 2.2kW@400V. It provides full protection to motors with a rated current Ir 3-12A (Ir adjustable), overload tripping class 10, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, insulation fault (protection of equipment only). It provides a thermal overload alarm to be used locally using a LUFDA module or remotely using a LULC module, and a test push button for overload simulation. To be used with a 110-240V AC / 110-220V DC voltage for the control of the starter (through the control terminals A1/A2 located in the power base). Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).