ATV630U15N4Z

Specifications

Prospective Line Isc

50 kA

Product Destination

asynchronous motors || synchronous motors

Line Current

3 A 380 V normal duty) || 2.6 A 480 V normal duty) || 1.7 A 380 V heavy duty) || 1.5 A 480 V heavy duty)

Emc Filter

integrated 10 m EN/IEC 61800-3 category C2 || integrated 50 m EN/IEC 61800-3 category C3 || with EMC plate option

Range Of Product

Altivar Process ATV600

Speed Drive Output Frequency

0.1-500 Hz

Asynchronous Motor Control Profile

variable torque standard || constant torque standard || optimized torque mode

Variant

standard version

Ip Degree Of Protection

IP20IEC 61800-5-1 || IP20IEC 60529

Product Or Component Type

variable speed drive

Apparent Power

2.2 kVA 480 V normal duty) || 1.2 kVA 480 V heavy duty)

Motor Power Kw

1.5 kW normal duty) || 0.75 kW heavy duty)

Switching Frequency

2...12 kHz adjustable || 4...12 kHz with derating factor

[Us] Rated Supply Voltage

380...480 V

Maximum Transient Current

4.4 A 60 s normal duty) || 3.3 A 60 s heavy duty)

[Us] Rated Supply Voltage

380...480 V - 15...10 %

Communication Port Protocol

Modbus TCP || Ethernet || Modbus serial

Discrete Input Logic

16 preset speeds

Type Of Cooling

forced convection

Continuous Output Current

4 A 4 kHz normal duty || 2.2 A 4 kHz heavy duty

Product Specific Application

process and utilities

Safety Function

STO (safe torque off) SIL 3

Nominal Switching Frequency

4 kHz

Maximum Horse Power Rating

2 hp normal duty || 1 hp heavy duty

Device Short Name

ATV630

Supply Frequency

50...60 Hz - 5...5 %

Synchronous Motor Control Profile

permanent magnet motor || synchronous reluctance motor

Option Card

slot A communication module, Profibus DP V1 || slot A communication module, PROFINET || slot A communication module, DeviceNet || slot A communication module, Modbus TCP/EtherNet/IP || slot A communication module, CANopen daisy chain RJ45 || slot A communication module, CANopen SUB-D 9 || slot A communication module, CANopen screw terminals || slot A/slot B digital and analog I/O extension module || slot A/slot B output relay extension module || slot A communication module, Ethernet IP/Modbus TCP/MD-Link || communication module, BACnet MS/TP || communication module, Ethernet Powerlink

Complementary

Electrical Connection

control removable screw terminals 0.5...1.5 mm² AWG 20...AWG 16 || motor screw terminal 2.5...6 mm² AWG 14...AWG 10 || line side screw terminal 2.5...6 mm² AWG 14...AWG 10

Maximum Output Frequency

500 kHz

Discrete Input Logic

positive logic (source) DI1...DI8), < 5 V, > 11 V || negative logic (sink) DI1...DI8), > 16 V, < 10 V

Height

285 mm

Analogue Output Type

software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1, AQ2 0...20 mA 10 bits || software-configurable current DQ-, DQ+ 30 V DC || software-configurable current DQ-, DQ+ 100 mA

Acceleration And Deceleration Ramps

linear adjustable separately from 0.01...9999 s

Discrete Output Type

relay outputs R1A, R1B, R1C 250 V AC 3000 mA || relay outputs R1A, R1B, R1C 30 V DC 3000 mA || relay outputs R2A, R2C 250 V AC 5000 mA || relay outputs R2A, R2C 30 V DC 5000 mA || relay outputs R3A, R3C 250 V AC 5000 mA || relay outputs R3A, R3C 30 V DC 5000 mA

Transmission Frame

RTU

Maximum Switching Current

relay output R1, R2, R3 resistive, cos phi = 1 3 A 250 V AC || relay output R1, R2, R3 resistive, cos phi = 1 3 A 30 V DC || relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 30 V DC

Relay Output Number

3

Exchange Mode

half duplex, full duplex, autonegotiation Ethernet/Modbus TCP

Data Format

8 bits, configurable odd, even or no parity

Power Range

1.1-2 kW 380-440 V 3 phase || 1.1-2 kW 480-500 V 3 phase

Phase

3 phase

Net Weight

3.7 kg

Type Of Polarization

no impedance

Relay Output Type

configurable relay logic R1 fault relay NO/NC 100000 cycles || configurable relay logic R2 sequence relay NO 100000 cycles || configurable relay logic R3 sequence relay NO 100000 cycles

Frequency Resolution

display unit 0.1 Hz || analog input 0.012/50 Hz

Accuracy

+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input || +/- 1 % AO1, AO2 for a temperature variation 60 °C analog output

Connector Type

RJ45 on the remote graphic terminal)Ethernet/Modbus TCP || RJ45 on the remote graphic terminal)Modbus serial

Input Compatibility

DI1...DI6 discrete input level 1 PLC EN/IEC 61131-2 || DI5, DI6 discrete input level 1 PLC IEC 65A-68 || STOA, STOB discrete input level 1 PLC EN/IEC 61131-2

Permissible Temporary Current Boost

1.1 x In 60 s normal duty) || 1.5 x In 60 s heavy duty)

Analogue Input Number

3

Motor Slip Compensation

can be suppressed || adjustable || not available in permanent magnet motor law || automatic whatever the load

Discrete Output Number

0

Mounting Mode

cabinet mount

Analogue Output Number

2

Physical Interface

Ethernet || 2-wire RS 485

Minimum Switching Current

relay output R1, R2, R3 5 mA 24 V DC

Method Of Access

slave Modbus TCP

Refresh Time

relay output R1, R2, R3)5 ms +/- 0.5 ms)

Enclosure Mounting

with heat sink

Isolation

between power and control terminals

Discrete Input Number

8

Local Signalling

for local diagnostic 3 LEDs || for embedded communication status 3 LEDs (dual colour) || for communication module status 4 LEDs (dual colour) || for presence of voltage 1 LED (red)

Linearity Error

AI1, AI2, AI3 +/- 0.15 % of maximum value analog input || AO1, AO2 +/- 0.2 % analog output

Number Of Addresses

1-247 Modbus serial

Output Voltage

<= power supply voltage

Quantity Per Set

1

Width

130 mm

Transmission Rate

10, 100 Mbits || 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps

Braking To Standstill

by DC injection

Depth

196 mm

Discrete Input Type

DI7, DI8 programmable as pulse input 0-30 kHz, 24 V DC <= 30 V)

Protection Type

thermal protection motor || safe torque off motor || motor phase break motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent between output phases and earth drive || overload of output voltage drive || short-circuit protection drive || motor phase break drive || overvoltages on the DC bus drive || line supply overvoltage drive || line supply undervoltage drive || line supply phase loss drive || overspeed drive || break on the control circuit drive

Supply

external supply for digital inputs 24 V DC 19-30 V), <1.25 mA overload and short-circuit protection || internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection || internal supply for digital inputs and STO 24 V DC 21-27 V), <200 mA overload and short-circuit protection

Analogue Input Type

AI1, AI2, AI3 software-configurable voltage 0...10 V DC 31.5 kOhm 12 bits || AI1, AI2, AI3 software-configurable current 0...20 mA 250 Ohm 12 bits || AI2 voltage analog input - 10...10 V DC 31.5 kOhm 12 bits

Sampling Duration

2 ms +/- 0.5 ms DI1...DI4) - discrete input || 5 ms +/- 1 ms DI5, DI6) - discrete input || 5 ms +/- 0.1 ms AI1, AI2, AI3) - analog input || 10 ms +/- 1 ms AO1) - analog output

Offer Sustainability

Rohs Exemption Information

Yes

Mercury Free

Yes

Environmental Disclosure

ENVPEP1812003EN

Sustainable Offer Status

Green Premium product

Reach Regulation

Reference contains Substances of Very High Concern above the threshold

California Proposition 65

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Weee

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

China Rohs Regulation

X

Circularity Profile

ENVEOLI1812003EN

Upgradeability

Upgraded components available

Eu Rohs Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Environment

Product Certifications

ATEX INERIS || DNV-GL || ATEX zone 2/22 || UL || CSA || TÜV

Power Dissipation In W

natural convection 28 W 380 V 4 kHz || forced convection 41 W 380 V 4 kHz

Standards

UL 508C || EN/IEC 61800-3 || EN/IEC 61800-3 environment 1 category C2 || EN/IEC 61800-3 environment 2 category C3 || EN/IEC 61800-5-1 || IEC 61000-3-12 || IEC 60721-3 || IEC 61508 || IEC 13849-1

Standards

UL 508C || EN/IEC 61800-3 || environment 1 category C2 EN/IEC 61800-3 || environment 2 category C3 EN/IEC 61800-3 || EN/IEC 61800-5-1 || IEC 61000-3-12 || IEC 60721-3 || IEC 61508 || IEC 13849-1

Pollution Degree

2

Electromagnetic Compatibility

electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5 || conducted radio-frequency immunity test level 3 IEC 61000-4-6

Ambient Air Temperature For Operation

-15-50 °C without derating) || 50-60 °C with derating factor)

Volume Of Cooling Air

38 m3/h

Insulation Resistance

> 1 MOhm 500 V DC for 1 minute to earth

Shock Resistance

15 gn 11 ms IEC 60068-2-27

Marking

CE

Vibration Resistance

1.5 mm peak to peak 2-13 Hz)IEC 60068-2-6 || 1 gn 13-200 Hz)IEC 60068-2-6

Noise Level

54.5 dB 86/188/EEC

Pollution Degree

2 EN/IEC 61800-5-1

Noise Level

54.5 dB

Regulation Loop

adjustable PID regulator

Ambient Air Temperature For Storage

-40-70 °C

Relative Humidity

5-95 % without condensation IEC 60068-2-3

Assembly Style

with heat sink

Operating Altitude

<= 3280.84 ft (1000 m) without derating || 1000...4800 m with current derating 1 % per 100 m

Operating Position

vertical +/- 10 degree

Maximum Thdi

<48 % full load IEC 61000-3-12

Overvoltage Category

III

CAD Models

traceparts

Download