Contactors & Relays

The 230/460V, 22MM SSZP CON, 50A, SCRW, 24VDC is a solid-state contactor designed for 1-phase operation. It features screw terminals and can handle up to 50 amps at 230 VAC to 460 VAC with a coil voltage of 24 VDC.This contactor is available in DIN rail or panel mount configurations, with a relay width of 22.5 mm and a heat sink width of 67 mm. It is designed for zero-point switching and comes with UL File E143112 in Vol.1 Sec.8.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 50A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 15HP at 200 to 208VAC, 15HP at 240VAC, 40HP at 480VAC and 40HP at 600VAC three phase. Contactor is also rated for 3HP at 115VAC and 7.5HP at 240VAC single phase. When used with a 480VAC up to 110A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 110A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 1.87 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys D contactors are designed for seamless integration into control systems. They offer versatility in various applications, supporting motor ratings up to 150 full-load amps and resistive loads up to 200 amps.This 50A inductive 3 pole IEC contactor is suitable for mounting on DIN rail or directly on a panel. It boasts both Horsepower and Kw motor ratings, ensuring international acceptance.The contactor can handle up to 100kA SCCR when used with a 480VAC up to 110A circuit breaker or a 600VAC 110A Class J or CC fuse. It comes with a 115 VAC 50/60 Hz coil and has one normally open and one normally closed auxiliary contact built-in as standard.The contactor measures 4.80 inches in height, 2.17 inches in width, and 4.72 inches in depth, weighing 1.87 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, making it a Green Premium product.

This power contactor operates effectively in AC-3 applications with a rated operation current of 300 A at 400 V, delivering a maximum power capacity of 160 kW. The device is designed for both AC and DC operation, with a control supply voltage of 96 V across a frequency range of 50-60 Hz.Featuring a three-pole configuration and a frame size of S10, the contactor includes two normally open (NO) and two normally closed (NC) auxiliary contacts, enhancing its flexibility in various applications. The connections are facilitated through busbar systems and a rail connection for the main circuit.Equipped with an electronic operating mechanism and a PLC interface operating at 24 V DC, this contactor is suitable for modular setups, making it adaptable for different configurations. The cage clamp terminal design ensures secure and reliable connections, contributing to the overall robustness of the installation.

TeSys K contactor, 3 poles (3NO), 9A/690V AC-3, for motor applications up to 4kW@400V. It provides a 220-230V 50/60Hz AC coil with rectifier incorporated and surge suppressor, 1NC built-in auxiliary contact, connection by screw clamp terminals. Silent contactor recommended for use in areas sensitive to noise and high interference mains supplies. Very compact, DIN-rail mounting and screw fixing, it procures reliability and durability to standard applications. Multi-standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHs/Reach).

TeSys D control relay, 5 contacts (5NO), 10A/690V, for control of electromagnetic loads AC-15/DC-13. It provides a 240V 50/60Hz AC control circuit, connection by screw clamp terminals. For high operating rates until 180 cycles/min and ambient temperature -40/+60°C, it procures high reliability and durability. Compact (45mm width), for clipping on 35mm DIN rail or fixing by screw. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium product (RoHS/REACh).

The contactor features three poles (3NO) and is rated for 265A under AC-3 utilization category, making it suitable for motor applications up to 132kW at 400V. It operates with a control circuit voltage of 240V AC at a frequency range of 40-400Hz.Designed to handle high operational rates of up to 2400 cycles per hour and endure ambient temperatures up to 55°C, this device ensures reliability in demanding environments. The installation is facilitated by a drawer-mounted coil, complemented by a variety of add-on blocks and accessories which are sold separately. The product is compliant with multiple international standards including IEC, UL, CSA, and others, and adheres to Green Premium guidelines regarding environmental impact.

The TeSys Deca Green contactors are designed for seamless integration into control systems. They can be used to create motor starters for a wide range of applications.These contactors come in 13 different ratings, suitable for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. The 65A inductive 3 pole IEC contactor can be mounted on DIN rail or directly on a panel.This contactor is rated for 20HP at 200 to 208VAC, 20HP at 240VAC, 40HP at 480VAC and 50HP at 600VAC three phase. It can also be used for single-phase applications with a rating of 5HP at 115VAC and 10HP at 240VAC.When used with a 480VAC up to 110A circuit breaker or up to a 600VAC 125A Class J or CC fuse, this contactor can have a SCCR of up to 100kA.Equipped with an electronic 24V DC coil for direct control by a PLC output, the contactor offers low consumption and comes with one normally open and one normally closed auxiliary contact as standard. The NC contact is mirror certified.The contactor measures 4.80 inches in height, 2.17 inches in width, and 4.72 inches in depth, weighing 2.21 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, and meets the requirements of RoHS/REACh.

The Harmony RXG interface relay is designed for use in various applications, featuring a coil control voltage of 24V DC and equipped with 2 changeover contacts rated at 5A. The relay incorporates a lockable test button and an LED indicator for status display, ensuring clear visibility of operation both day and night. This relay facilitates installation with its faston pin terminal, allowing for quick and secure mounting, thus reducing enclosure size and enhancing machine reliability. It is well-suited for integration with industrial programmable logic controllers (PLCs) and is capable of operating in a broad temperature range of -40 to 70 °C. The design supports a maximum switching capacity of 1250 VA and is built to endure up to 10 million mechanical cycles. With a dielectric strength of 1000 V AC between contacts and a robust insulation resistance of 1000 MOhm at 500 V DC, this relay ensures high operational safety and reliability. It is compliant with multiple standards including CSA C22.2 No 14, UL 508, and IEC 61810-1, making it suitable for various industrial applications.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 40A resistive load rating. Contactor is supplied with a 220 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.58 inches tall, 1.77 inches wide and 4.21 inches deep. It weighs 0.94 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The AS-I Safety Monitor is equipped with enhanced features for reliable operation. It includes 40ms response time for the signalling circuit and 2 release circuits rated at IP20. This safety monitor adheres to AS-interface safety standards, making it suitable for use up to Category 4 (EN954-1), PL e (EN ISO 13849-1), and SIL 3 (IEC 61508).The device features screw terminal removable terminals and a safe output relay. It is designed for applications requiring high safety levels, such as those in the automation industry.

Contactor,IEC,Sirius,Standard 3 Pole,Non-Reversing 220 - 240 AC/DC Coil Frame Size S12,500A Panel Mount 2 NO & 2 NC Auxiliaries No Suppression Lugs (Not Included) Terminals UL File E31519 in Vol.11 Sec. 4

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 110A resistive load rating. Contactor is supplied with a 230 VAC 50 Hz coil. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.78 inches wide and 4.92 inches deep. It weighs 3.88 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

LP1K0910ED is a compact 3-pole TeSys K contactor from Schneider Electric for motor applications. Rated 9A AC-3 4kW@400V, it includes a 48 V DC coil and 1NO auxiliary contact allowing easy integration to all control systems. LP1K0910ED is a 3-pole TeSys K contactor from Schneider Electric for simple motor applications rated up to 4kW@400V. Very compact, DIN-rail compatible, with connections by screw clamp terminals, it can be easily integrated into all control systems thanks to its 48V DC coil and 1NO built-in auxiliary contact. Available worldwide, it complies with multi-standards (IEC, UL, CSA, CCC, EAC, Marine) and is certified Green Premium (RoHs/Reach). Very compact, 45mm wide, for DIN-rail and panel mounting. Ready for connection to all control systems thanks to a 48V DC control voltage and 1NO built-in auxiliary contact. Optimized for simple power applications. Can be completed with auxiliary contact blocks (LA1K, LA2K) and thermal relays (LR2K).

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 9A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 20HP at 200-208VAC, 25HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Contactor is also rated for 7.5HP at 115VAC and 15HP at 240VAC single phase. When used with a 480VAC up to 35A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 25A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 120 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.15 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.71 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The contactor coil operates at a voltage of 115V AC within the frequency range of 50/60Hz, specifically designed for compatibility with TeSys Deca contactors, including models LC1D115 and LC1D150. The coil maintains operational voltage limits between 0.8 and 1.15 Uc under standard conditions, with a maximum operating rate of 1200 cycles per hour at 60°C. It features an average resistance of 4377 Ohm at 20°C and an inductance of 109.69 H, ensuring robust performance in various environments.This component is rated for operation in ambient air temperatures ranging from -5°C to 60°C. It is notable for its mechanical durability, rated for 8 million cycles, making it suitable for industrial applications. The coil's inrush power consumption is between 280 and 350 VA, depending on frequency and temperature, with a hold-in power consumption varying between 2 and 18 VA.Additionally, the coil is designed without a built-in suppressor module, ensuring simplicity in installation and integration. Compliance with global standards is evident, as the product is free from substances of very high concern and adheres to various regulatory requirements.

The IEC contactor is part of the TeSys Deca range, specifically designed for integration into motor control systems. This particular model supports a current rating of 50A and is suitable for inductive loads, facilitating operation in various motor applications up to 40HP at 480VAC, while also being compatible with resistive loads.It includes a 72VDC coil equipped with a transient suppressor module and features three normally open contacts. The contactor is designed to be mounted on a DIN rail or directly on a panel, with dimensions of 4.80 inches in height, 2.17 inches in width, and 4.72 inches in depth, weighing approximately 1.87 lbs. The device complies with multiple international standards including UL, CSA, IEC, and RoHS, confirming its suitability for global use. The contactor also ensures safety under various conditions with a short-circuit current rating (SCCR) of up to 100kA when used with appropriate circuit breakers or fuses.Noteworthy operational specifications include a mechanical durability of 10 million cycles and electrical durability rated at 1.45 million cycles for 50A AC-3 at up to 440V. Its robust construction allows it to withstand temperatures ranging from -40°C to 60°C, with a derating in higher temperatures. The contactor is further enhanced with built-in auxiliary contacts, ensuring operational reliability and versatility in various applications.

The RCM370524 relay is equipped with three CO contacts and a test button, constructed from AgNi 90/10 material. It operates at a rated control voltage of 24 V AC and supports a continuous current of 10 A. The device features a plug-in connection for ease of integration.With a mechanical service life rated for up to 20 million switching cycles for AC coils and 30 million for DC coils, this relay is built for durability. It also has a rated switching voltage of 240 V AC, with a maximum switching voltage of 400 V AC, and can handle an inrush current of 20 A for 20 ms.In terms of dimensions, the relay measures 22.5 mm in width, 28 mm in height, and 29 mm in depth, with a net weight of 30.511 g. It also includes a mechanical switch position indicator and is constructed with a transparent color for visibility.The relay adheres to several standards, including IEC 61810-1 and UL 508, and has multiple approvals such as CE and CSA. The insulation coordination features a protection degree of IP20 and a dielectric strength of 2.5 kVeff for input/output connections. Operating temperatures range from -40 °C to 70 °C, ensuring reliability in various environments. This product is classified under the Designation Code of EC001437.

Contactor,IEC,Sirius,Standard 3 Pole,Non-Reversing 110 - 127 AC/DC Coil Frame Size S6,185A Panel Mount 2 NO & 2 NC Auxiliaries No Suppression Lugs (Not Included) Terminals UL File E31519 in Vol.11 Sec. 5

TeSys Giga High Power Contactors Experience the power of TeSys Giga high power contactor, designed for demanding AC-3 applications. With a capacity of up to 225A and 132kW at 440V, this contactor is built to handle high power loads with ease. Featuring a wide band low consumption electronic coil that operates on 100-250V AC/DC, it offers efficient performance while maintaining low energy consumption. The embedded auxiliary contact block provides reliable operation with 1NO+1NC contacts rated at 17V and 1mA. This high power contactor is designed to operate at maximum rates up to 600 cycles per hour in environments up to 60°C. It offers a mechanical durability of 5 Mcycles, ensuring high reliability and durability for long-term use. With local Contact Wear Diagnosis (CWD) as a standard function, the contactor continuously monitors its health status with healthy and alarm indicators. The switching module can be replaced to enhance the contactor's life, allowing for easy maintenance without removing cables or busbars. The compact size of 255mm x 108mm x 175mm (H x W x D) enables panel space savings. The contactor can be fixed in all quadrants and is compatible with power connections by bolted connection and control connections by spring terminals, accessible from the front for easy and quick replacement. It offers IP2x protection on the front face with shrouds conforming to IEC 60529 and VDE 0106. It can operate in ambient air temperatures ranging from -25°C to 60°C and is directly mountable on a plate, with no derating up to 3000m altitude. Multi-standard certified (CE, CB, CCC, cULus, EAC, KC, RCM, Marine) and Green Premium compliant (RoHs/Reach), the TeSys Giga High Power Contactors are designed for maximum efficiency and sustainability. Unique QR code provides quick access to complete product data. Replaceable switching module enhances contactor life, allowing for easy maintenance without removing cables or busbars.