419D

1 / 3

Part Number: 419D

Payment methods:

Best offer from:: Trusted Automa.Net Supplier
Availability:: 20 pcs.
In-Stock
Updated at: 21-11-2024
Warranty:: 12 months
Estimated Delivery:: On Request
Condition:: New Factory Sealed

New Factory Sealed - A brand-new, unused, unopened, undamaged item in its original manufacturer-sealed packaging.

Shipping Information

Secure Payment Process

Return & Refund Policies

Shipping Policies

Warranty Policies

General

Safety: IEC Standard No. 61010-1:2001
Protection class: IP54
EMC: EN 61000-4-8:2010
Weight (with batteries): 153 g
Size (L x W x D): 127 x 56 x 33 mm
Laser type: 635 nm, < 1 mW
Safety: EN60825-1:2007 (Class II)
Laser class: 2
Battery life (2 x AAA) 1.5 V NEDA 24A/IEC LR03: Up to 5,000 measurements
Temperature range Storage operation: -10°C to +50°C (14°F to +122°F)
Automatic power off: After 180 seconds
Maximum relative humidity: 85% at 20°F to 120°F (-7°C to 50°C)
Calibration cycle: Not applicable
Automatic laser off: After 90 seconds
EMC: EN 55022:2010
Maximum altitude: 3000 m
EMC: 1. Applies for 100% target reflectivity (white painted wall), low background illumination, 25°C. 2. Applies for 10 to 500% target reflectivity, high background illumination, -10°C to +50°C. 3.Tolerances apply from 0.05 m to 10 m with a confidence level of 95%. The maximum tolerance may deteriorate to 0.1 mm/m between 10 m to 30 m and to 0.15 mm/m for distances above 30 m. 4. Applies for 100% target reflectivity, background illumination between 10'000 lux and 30'000 lux. 5. After user calibration. Additional angle related deviation of ±0.01° per degree up to ±45° in each quadrant. Applies at room temperature. For the whole operating temperature range the maximum deviation increases by ±0.1°.
EMC: EN 61000-4-3:2010
Temperature range Storage operation: -25°C to +70°C (-13°F to +158°F)

Distance Measurement

Ø Laser point at distances: 6 / 30 / 60 mm (10 / 50 / 100 m)
Smallest unit displayed: 6 / 30 / 60 mm (10 / 50 / 100 m)
Typical measuring tolerance 1: ±1.0 mm 3
Range at Leica Target Plate GZM26: 80 m / 260 ft
Maximum measuring tolerance 2: ±2.0 mm 3
Typical range 1: 80 m / 260 ft
Range at unfavorable condition 4: 60 m / 195 ft

Tilt measurement

Measuring tolerance to housing 5: No
Range: No
Measuring tolerance to laser beam 5: No

Related products

7109-2013-1

EI-1625

I1010

Highly reliable, measures 1 A to 1000 A and provides accurate current reading without breaking the circuit. Buy Online Now.

IKPL3

VPS420-V

9144-C-156

The 9144 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.

C789

FLUKE 971

FLK-LENS/4XTELE2

FLK-LENS/4XTELE2

9143-DW-156

The 9143 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.

P5543

FLUKE 355

FLUKE 566

TL224

These insulated test leads provide the convenience and variety for test lead configurations by attaching clips, hooks and grabbers as needed. Buy Online Now.

9143-E-156

The 9143 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.

FLK-TI-SBC3B

TL238

9144-F-156

The 9144 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.

P5513-2700G-3/C

P5513-2700G-3/C

FLUKE 424D