Fluke i2000 Flex

Electrical specifications

Current ranges

20 A200 A2000 AAC rms

Output sensitivity (AC-coupled)

1 mV10 mV100 mV1 mV per A

Load impedance

100 kΩ minimum

Accuracy

at +25°C±1% of range (45 Hz to 65 Hz)

Linearity

10% to 100% of range±0.2% of reading

Noise

8 mV AC rms (30 A)2 mV AC rms (300 A, 3000 A)

Frequency range

10 Hz to 20 kHz (-3 dB)

Phase error

< ±1° (45 Hz to 65 Hz)±10° (at 20 kHz)

Position sensitivity

with cable > 25 mm from the coupling±2% of range

External field

with cable > 200 mm from the head±1% of range

Power supply

2 x AA/MN 1500/LR6 Alkaline, 200 hours, low battery indicator

Temperature Coefficient

±0.08% of reading per °C

Working voltage

see Safety standards section600 V AC rms or DC

General Specifications

Head Circumference

610 mm (24 in)

Head cable diameter

14.3 mm (0.56 in)

Head bend radius

38.1 mm (1.5 in)

Cable length (head to electronics)

2 m (6.56 ft)

Output connection

Molded 4 mm safety plugs (not integrated)

Operating temperature range

0°C to +70°C (32°F to 158°F) (head and electronics)

Storage temperature range

-40°C to +105°C (-40°F to 221°F) (head)-20°C to +85°C (-4°F to 185°F) (electronics)

Operating humidity

15% to 85% (non-condensing)

Weight

180 g (6.34 oz) (head)190 g (6.70 oz) (electronics)

Safety standards

EN 61010-031: 2002EN 61010-2-032: 2002EN 61010-1: 2001600 Vrms, Category III, Pollution Degree 2Use of the probe on uninsulated conductors is limited to 600 V ac rms or dc and frequencies below 1 kHz.

EMC standards

EN 61326: 1998 +A1, A2, and A3

Dimensions (H x W x D)

116 x 68.5 x 30 mm (4.56 x 2.69 x 1.18 in)

Documents