Fluke Norma 5000

Standards and Safety

Electrical Safety

EN 61010-1 / 2nd Edition 1000 V CAT II (600V CAT III) || Degree of pollution 2, safety Class I || EN 61558 for transformer || EN 61010-2-031/032 for accessories

Maximum inputs

For voltage inputs Measurement range 1000 Veff, 2 kVpeak || For current inputs Measurement range 10 Aeff, 20 Apeak

Test voltage

Net input: case (protective conductor): 1.5 KV AC || Measurement inputs: Case: 3.3 kV AC || Measurement input: input: 5.4 kV

Test voltage Net connection

Measurement input: 5.4 kV AC

Electromagnetic susceptibility Emission

IEC 61326-1, EN 50081-1, EN 55011 Class B

Electromagnetic susceptibility

Immunity: IEC 61326-1 / Annex A (industrial sector), EN 50082-1

Interface

Options

IEEE 488.2 / 1 MBit/s || Ethernet / 10 MBit/s or 100 Mbit/s

Ambient Conditions

Working Temperature Range

5°C to 35°C (41°F to 95°F)

Storage Temperature Range

-20°C to 50°C (-4°F to 122°F)

Housing Material

Fluke Norma Power Analyzers are extremely compact and equipped with a solid metal case to meet stringent EMC requirements.

Climatic Class

KYG DIN 40040, max. 85% relative humidity, non-condensing.

Power supply

85 V AC to 264 V AC, 50 Hz to 60 Hz, DC 100 to 260 V, ca. 40 VA European plug with switch. Binding post for current available on some models.

Measuring Inputs

Safety sockets 4 mm, 2 for each input. External shunt connection over BNC socket.

Operation

Membrane keyboard with cursor – function keys and direct functions.

Connections

Rear panel of the 3-phase Analyzer

Planarshunt

Continuous load (Imin)Range (Imax)

0.3 A

Continuous load (Imin)

32 A

Nominal current (calibration point)

32 A

Basic accuracy at calibration point [%]

± 0.03

Basic accuracy at nominal current [%]

± 0.03

Nominal voltage drop [V]

320 mV

Nominal resistance [Ohm]

10 mΩ

Short time overrange(5s load 15s interval)

100A/ 1s-5s

Bandwidth

DC - 1 MHz

Angular accuracy [°/kHz]

± 0.1

Temperature coefficient [ppm/K]

≤10

Weight (kg / lbs)

0.62 /1.36

Basic Functions

Fast Fourier Transformation (FFT)

Calculation of harmonics with graphical representation. Up to 3 bar graphs are displayed at the same time. || Measured values: U, I, P per phase || Order: 1st to 40th harmonics, maximum half sample frequency

Digital Oscilloscope (DSO)

Simultaneous display of up to 3 measured values on sample level. Quick view of curve form and distortion.

Integration function (energy)

Simultaneous display of up to 6 configurable numeric values. Start/Stop conditions and positive negative direction available.

Vector Display

Vector display of HO1 up to 6 signals. For easy testing of the right connection of the instrument and quick overview of the phase angle of each signal.

Recorder

Display of average values over time for trend determination.

RAM data memory

Storing of sample and average values; setting of start and stop conditions. || From the RAM approximately 4 MB are available for the storage of measured values.

Configuration

Set up the analyzer to measure and display data in the format required.

Frequency and Synchronization

Range

DC and 0.2 Hz to sample rate

Accuracy

±0.01% of measured value (reading)

Power Phase Channels

PP42 Accuracy

0.2% (0.1% rd + 0.1% rg)

PP42 Current range

20 A

PP42

Sampling rate: 341 kHz

PP42 Bandwidth

3 MHz

PP50 Accuracy

0.1% (0.05% rd + 0.05% rg)

PP50 Current range

10 A

PP50

Sampling rate: 1 MHz

PP50 Bandwidth

10 MHz

PP54 Accuracy

0.1% (0.05% rd + 0.05% rg)

PP54 Current range

10 A

PP54

Sampling rate: 341 kHz

PP54 Bandwidth

3 MHz

PP64 Accuracy

0.03% (0.02% rg + 0.01% rg)

PP64 Current range

10 A

PP64

Sampling rate: 341 kHz

PP64 Bandwidth

3 MHz

General Specifications

Number of Phases

1 to 3

Weight

Approx. 5 kg (11 lb)

Size

150 x 237 x 315 mm || 5.9 x 9.3 x 12.4 in

On-board Printer

No

Display

Color, 5.7 in / 144 mm - 320 x 240 pixel || User-selectable background lighting and contrast.

Bandwidth

DC to 3 MHz or DC to 10 MHz depending on input module

Basic Accuracy

0.2%, 0.1% or 0.03% depending on input modules

Sampling Rate

0.33 MHz or 1 MHz depending on input modules

Voltage Input Range

0.3 V to 1000 V

Current Input Range (direct, not via shunt)

0.03 mA to 20 A depending on input module

Memory for Configurations

4 MB

Memory for Settings

0.5 MB

Fast Fourier Transformation (FFT)

To the 40th harmonic

RS232/USB Interface

Standard

PI1 Process interface (8 analog/impulse inputs and 4 analog outputs)

Optional

IEEE 488.2/GPIB interface (1 MBit/s Ethernet / 10 MBit/s or 100 MBit/s)

Optional

Fluke NormaView PC software (for data download, analysis and report writing)

Standard

Documents