Pepperl+Fuchs Industrial Automation Spare Parts

The background suppression sensor, designated as ML10-8-H-3,2-IR/115, operates using modulated infrared light at 870 nm and is engineered for precise detection. It provides a detection range from 0.9 mm to a maximum of 4 mm, with background suppression beginning at 4 mm. The sensor's light spot diameter measures 2 mm when positioned at a range of 2.2 mm, and it has an opening angle of approximately 24°.With a switching accuracy of less than 0.5 mm for black (6%) and white (90%) surfaces, the sensor ensures reliable performance. Its repeat accuracy for white surfaces is below 0.1 mm. The device is built to withstand ambient temperatures ranging from -20 °C to 60 °C and can be stored in temperatures as low as -20 °C and as high as 75 °C.Constructed with an IP65 protection degree, the housing is made from a combination of PC/ABS, while the optical face is glass. The sensor is equipped with a 2 m cable featuring a 5-pin connector, and the overall dimensions are 14 mm in height, 12 mm in width, and 20 mm in length. The unit weighs 30 g and adheres to multiple standards and directives, including EN 60947-5-2:2007 and IEC 60947-5-2:2007 for electromagnetic compatibility.

The triangulation sensor is designed for standard applications and incorporates background suppression technology. It features an adjustable detection range from 10 mm to 60 mm, with a maximum detection capability reaching 80 mm. The sensor operates using modulated visible red light at a wavelength of 660 nm, ensuring precise detection. The diameter of the light spot at 60 mm is approximately 4 mm, with an opening angle of around 5 degrees.It includes two push-pull outputs that are programmable for light/dark on switching and are equipped with short-circuit protection and reverse polarity safeguards. The sensor supports a switching frequency of up to 1000 Hz and has a response time of 0.5 ms, making it suitable for dynamic applications.With a robust design, it achieves a degree of protection rated at IP67 and IP69K, ensuring reliable operation in harsh conditions. The sensor can function effectively in ambient temperatures ranging from -20 °C to 60 °C, and has a storage temperature capability of -20 °C to 75 °C. The housing is constructed from ABS, while the optical face is made of PMMA, making the unit lightweight at approximately 50 g.The product conforms to the EN 60947-5-2 standard and meets various safety and environmental compliance certifications, including cULus and CCC. The designation code for this model is ML6-8-H-60-RT/59/115a/136, which can be referenced for further specifications and details.

The triangulation sensor with background suppression, designated as OBT15-R2-E0-Y264205, is engineered for standard applications and offers a compact form factor. It has a detection range varying from 2 to 15 mm, optimized for detecting standard white targets measuring 100 mm x 100 mm.Powered by a modulated visible red light LED at 630 nm, the device maintains a black-white difference of less than 5% at 15 mm. The light spot diameter is approximately 2 mm at this distance, with an angle deviation of around 2 degrees. It operates effectively under ambient light conditions up to 30,000 Lux, complying with the EN 60947-5-2 standard.For functional safety, the sensor has a mean time to failure (MTTFd) of 800 years and a mission time (TM) of 20 years, with no diagnostic coverage. Operational indicators include a green LED for power and a yellow LED that signals when an object is detected.Electrical specifications include an operating voltage range of 10 to 30 V DC, with a no-load supply current of less than 10 mA. The output is configured as a normally open contact with a single NPN output that is short-circuit and reverse polarity protected, capable of handling a maximum switching voltage of 30 V DC and a current of 50 mA on resistive loads. The switching frequency is approximately 800 Hz, with a response time of 600 µs.The sensor is designed for a wide ambient temperature range of -25 to 60 °C and can withstand storage temperatures as low as -30 °C and as high as 70 °C. It features an IP67 protection rating, indicating its suitability for harsh environments. The housing is made from PC/ABS and TPU, while the optical face is constructed from glass. The device includes a 2-meter fixed cable and is equipped with two mounting holes for easy installation.

The area scanner with the designation code FLT-8-HW-2800-500/59/101 is engineered to effectively detect people and objects within a detection field of 500 mm x 500 mm at a sensor range of 2000 mm. It operates within a detection range that spans from 0 to 2800 mm, utilizing a light source composed of four modulated infrared light emitting diodes (IREDs).Functionality is characterized by a dark-on switching type, providing both PNP and NPN outputs that are short-circuit protected. The device supports a maximum switching voltage of 48 V DC and a current of 200 mA, enabling rapid response times of 100 ms with a de-energized delay of 200 ms. The device is also equipped with an LED indicator for operational status and a sensing range adjuster for fine-tuning detection parameters.This area scanner is built to withstand ambient temperatures ranging from -20 °C to 60 °C and features a robust IP65 degree of protection, making it suitable for various industrial environments. The housing is made from Makrolon GV30, while the optical face is crafted from red glass, ensuring durability and clarity in detection. With a maximum mounting height of 2800 mm, it can be effectively integrated into a variety of applications.

The stationary multicode read device is capable of decoding various symbologies, including Maxi Code, PDF 417, Data Matrix, and QR Code, with a maximum reading speed of 10 m/s. It operates with a VGA resolution and utilizes integrated LED lighting to ensure effective side illumination during operation. The device supports an angled line of vision and has a reading field of up to 50 mm x 30 mm.In terms of connectivity, the unit features Ethernet and RS 232 interfaces, allowing for flexible integration into existing systems. The Ethernet port supports a transfer rate of 100 MBit/s, with a maximum cable length of 30 m. The RS 232 interface operates at a transfer rate ranging from 9600 Bit/s to 115200 Bit/s, also with a maximum cable length of 30 m.Operating within an ambient temperature range of 0 to 45 °C and storing safely at temperatures from -20 to 60 °C, the device is designed for durability with an IP65 protection class. The housing is constructed from powder-coated diecast zinc, and the overall dimensions are 60 mm x 60 mm x 120 mm, weighing approximately 760 g. Compliance with EMC directives and relevant standards ensures reliable performance across various environments. The designation code for this product is ODT-MAC431-LD-WH-MC.

The stationary multicode reader, designated as ODT-MAC431-HD-WH-MC, effectively reads a wide range of codes including Maxi Code, PDF 417, Data Matrix, QR Code, and various others at speeds reaching 2 m/s. It operates with an integrated LED lighting system and a camera equipped with a global shutter, providing a resolution of 752 x 480 pixels and a gray scale of 256 levels.Its reading capabilities extend to a distance of 60 mm, with a depth of focus of ± 3 mm and a maximum reading field of 15 mm x 10 mm. The multicode reader supports multiple interfaces including Ethernet with a TCP/IP protocol and RS 232, allowing for flexible connectivity options with a maximum cable length of 30 m.This device is designed to function effectively in ambient temperatures ranging from 0 to 45 °C (32 to 113 °F) and can be stored at temperatures between -20 and 60 °C (-4 to 140 °F). The housing is constructed from powder-coated die-cast zinc, ensuring durability with an IP65 protection rating.

The area scanner FLT-8-HW-2800-50/31/59 features a detection field of 50 mm x 500 mm at a sensor range of 2000 mm, enabling it to effectively identify objects and individuals. With a detection range extending from 0 to 2800 mm and a minimum detection capability of 0 to 1200 mm, it utilizes modulated infrared light from three IREDs to ensure reliable operation.This device operates in a background evaluation mode, with a dark-on switching type. The relay output can switch up to 48 V AC/DC with a maximum current of ≤ 2 A and a response time of 100 ms. The area scanner is equipped with an LED indicator to signify function status and features a sensing range adjuster for enhanced operational flexibility.In terms of electrical specifications, the scanner requires an operating voltage between 15 and 48 V AC/DC, with a no-load supply current of 100 mA and a power consumption of 2.5 W. Its ambient conditions allow operation in temperatures ranging from -20 to 60 °C and storage from -20 to 75 °C, making it suitable for various environments.The scanner also complies with several standards, including EN 60947-5-2:2007+A1:2012 for product standards and the EMC Directive 2004/108/EC, ensuring it meets industry safety and performance requirements. The device is housed in a durable Novodur black casing with a glass optical face and has a degree of protection rated at IP65, suitable for challenging conditions.Included with the scanner is a 2 m connecting cable, facilitating installation. With a compact design measuring 64 mm in height, 150 mm in width, and 52 mm in depth, it weighs 320 g, allowing for efficient integration into various systems.

The background suppression sensor utilizes a fiber-optic design, facilitating a compact form factor ideal for constrained spaces. It operates with a detection range of 0.9 to 2.2 mm, extending to a maximum of 4 mm, and is equipped to suppress backgrounds starting from 4 mm. The sensor emits modulated infrared light at a wavelength of 870 nm, ensuring reliable performance across various surfaces.In terms of operational precision, the sensor exhibits a switching accuracy of less than 0.5 mm for black surfaces and a repeat accuracy of less than 0.1 mm for white surfaces. Its light spot diameter measures 2 mm at the maximum sensor range of 2.2 mm, with an opening angle of approximately 24 degrees.The device is compliant with several standards, including the EMC Directive and IEC standards, ensuring robustness against environmental stress factors. The sensor is rated IP65, indicating its suitability for harsh conditions, and can operate within an ambient temperature range of -20 to 60 °C. Its compact dimensions of 14 mm in height, 12 mm in width, and 20 mm in length contribute to its practicality.For integration, the sensor features a fixed 2-meter cable with a 4-pin flat connector, designed for compatibility with SU100 or SU180 Series control interface units. This sensor, designated as ML10-8-H-3,2-IR/115e, is engineered for applications requiring precise distance measurement and background suppression.

The print mark contrast sensor, designated as DKE21-9,5/110/124, is constructed with a durable stainless steel housing. It operates within a detection range of 9.5 mm, with a tolerance of ± 3 mm, utilizing a modulated LED light source that emits visible green, red, and blue light. The sensor projects a rectangular light spot measuring 1 mm by 4 mm, and allows for dynamic Teach-in functionality.With an electrical operating voltage range of 10 to 30 V DC, this device ensures reliable performance with a no-load supply current of ≤ 60 mA. The push-pull output is designed to be short-circuit and reverse polarity protected, supporting switching currents up to 200 mA and a frequency of 16.5 kHz, with a response time of 30 µs.For enhanced durability, the sensor conforms to several international standards, including EN 60947-5-2:2007 and IEC 60947-5-2:2007, with significant resistance against shock and vibration. Its degree of protection is rated at IP67, ensuring reliable operation in challenging conditions. The sensor operates effectively in ambient temperatures ranging from -20 °C to 60 °C and can be stored at temperatures between -20 °C and 75 °C.The sensor features a 5-pin M12 x 1 connector for easy integration and weighs 530 g. Its compact dimensions measure 85.6 mm in height, 33 mm in width, and 60.8 mm in depth, making it suitable for various industrial applications.

The retroreflective sensor, designated as ML7-54-G-3349, is engineered for standard applications with a compact design that allows for precise detection of clear objects. It utilizes a modulated visible red light source at 660 nm, ensuring effective operation within an effective detection range of 0 to 5.7 m, while the threshold detection distance reaches up to 7.6 m when used with the H85-2 reflector.The device operates within a voltage range of 10 to 30 V DC and features a dark-on switching type with a maximum switching current of 100 mA. Its response time is measured at 500 µs, supporting a switching frequency of 1 kHz, making it suitable for various industrial applications.With a degree of protection rated at IP67/IP69K, the sensor is constructed from durable materials including glass-fiber-reinforced Makrolon for the housing and PMMA for the optical face. Capable of functioning in ambient temperatures from -20 °C to 60 °C, it also offers storage capabilities within -40 °C to 75 °C. The sensor is equipped with an M8 x 1 connector and has a mass of 10 g, with dimensions of 31 mm in height, 11 mm in width, and 23 mm in depth.Functional indicators include a statically lit green LED for power and a pulsing green LED indicating undervoltage. Compliance with EN 60947-5-2:2007 and IEC 60947-5-2:2007 ensures that the sensor adheres to established standards and directives, providing reliable performance in industrial environments.

The stationary multicode read device, identified by the designation code ODT-MAC433-LD-WH-MC, is optimized for reading an extensive range of code symbologies including Maxi Code, PDF 417, QR Code, and more. It operates effectively at a reading distance between 60 mm and 200 mm, depending on the symbology used, with a depth of focus of approximately ± 70 mm. The device is equipped with a CMOS camera featuring a global shutter and a resolution of 752 x 480 pixels, allowing for real-time and program-controlled image capture. With an evaluation frequency of up to 30 Hz, this reader can handle target velocities of up to 10 m/s. The integrated LED lighting ensures optimal performance across various lighting conditions. The device includes multiple interfaces, featuring Ethernet for TCP/IP communication with a transfer rate of 100 MBit/s and an RS 232 interface supporting ASCII protocol with adjustable transfer rates from 9600 to 115200 Bit/s. Operating at a voltage of 24 V DC with a maximum current consumption of 250 mA, the device has a power consumption of 6 W. It is built to withstand conditions with an ambient temperature range of 0 to 45 °C and is housed in a robust, powder-coated diecast zinc casing, ensuring a degree of protection rated at IP65.

This active infrared scanner functions as a light curtain for the individual protection of automatic doors, adhering to the standards set by DIN 18650/EN 16005. It is designed for use on doors measuring up to 1200 mm in width. The system can detect objects within a range from 0 to 3500 mm, with a sensing range of 1000 mm at an installation height of 2100 mm. The light source operates at an infrared wavelength of 850 nm, ensuring reliability in varying conditions.Featuring a total of 10 beams, this device employs background evaluation in its operating mode. The diameter of the light spot measures 8 cm at a sensor range of 2000 mm, providing effective coverage. The scanner operates at a voltage of 24 V DC with a maximum no-load supply current of 200 mA and has a power consumption of 4.8 W.For functional safety, it achieves a Safety Integrity Level (SIL) of SIL 2, with a performance level (PL) of PL d, categorized under Cat. 2. The device has a mean time to failure (MTTFd) of approximately 112.7 years and is rated for a mission time of 10 years.Indication of functionality is provided via multiple LEDs: a red LED for detection and fault codes, a yellow LED indicating teach status, and green LEDs for blank status and DIP switch status. The scanner's control elements include a teach-in key and DIP switches for mode selection. The output is configurable as a switchable NPN or PNP signal, with a maximum switching voltage of 30 V DC and a maximum current of 100 mA.Constructed with an aluminum and polycarbonate housing, this scanner is rated at IP54 for protection against dust and water when mounted. It operates effectively in ambient temperatures ranging from -30 to 60 °C. The complete system includes all necessary modules, connecting cables, and mounting components, specifically designed for the hinge and leading edge sides. The designation code for this product is DoorScan-DS-2P-1200.

The light grid model LG8-G-150-K-2-F is designed for precise detection with a field height of 235 mm and a beam gap of 30 mm. It incorporates 8 beams and offers an effective detection range extending from 800 mm to 1500 mm, making it suitable for various applications requiring reliable performance.Utilizing modulated infrared light as its light source, this unit operates efficiently within an ambient light limit of 50,000 Lux. The sensitivity is adjustable via a calibration input, allowing customization to meet specific operational needs.Electrical specifications indicate an operating voltage range of 24 to 28 V DC, with a ripple of 5%. The output is configured for dark-on operation, providing a PNP signal that is short-circuit protected. The maximum switching voltage is 28 V DC, with a switching current capability of up to 100 mA and a response time of 10 ms.For environmental resilience, the device is rated with an IP54 degree of protection, ensuring it operates effectively within an ambient temperature range of -15 °C to 50 °C. The housing is constructed from aluminum, while the optical face is made from PMMA, offering durability and clarity.Compliance with the EMC Directive 2004/108/EC and relevant standards such as EN 60947-5-2:2007 ensures that the light grid meets necessary safety and performance criteria, making it a reliable choice for industrial automation applications.

The background suppression sensor operates effectively within an adjustable detection range of 15 to 600 mm, making it suitable for various applications. It utilizes modulated infrared light, specifically at 880 nm, to detect objects, ensuring high accuracy with a black-white difference of less than 15%. The sensor has a diameter of the light spot of approximately 40 mm at the maximum detection range of 600 mm. Its design includes a fixed cable with an M12 plug and an additional fixed cable with an M12 socket for straightforward integration. The sensor is equipped with a yellow LED function indicator that activates upon detecting an object. The adjustment range spans from 250 to 600 mm, allowing flexible deployment based on specific operational requirements. In terms of electrical specifications, the sensor operates at a voltage of 24 VDC with a maximum no-load supply current of 20 mA. Its output is a PNP signal, which is short-circuit and reverse polarity protected, handling switching voltages up to 30 V DC and currents up to 200 mA. The response time is rapid at 5 ms, enabling swift reaction in dynamic environments. Built to withstand harsh conditions, the sensor boasts an IP65 protection rating, indicating resistance to dust and water, with operational temperatures ranging from -20 to 50 °C (-4 to 122 °F). It complies with multiple standards, including EN 60947-5-2, and has undergone rigorous testing for shock and vibration resistance per IEC / EN 60068. Designation Code: SBL-8-H-600-IR-SL-3549 100pcs.

The dual background suppression sensor, designated as ML6-8-H-40-RT/DS/25/95/136, is engineered for standard applications and offers a compact design ideal for constrained spaces. It operates within a detection range of 10 to 40 mm, with a maximum detection limit of 50 mm, ensuring precise object detection. The sensor utilizes two LEDs to emit visible red light at a wavelength of 660 nm, with a specified black-white difference of approximately 3 mm. The light spot diameter measures 3.5 mm at a distance of 9 mm when the detection range is set to 40 mm. With an opening angle of around 5°, the sensor effectively minimizes background interference starting from 50 mm. Designed for robust functionality, this sensor’s electrical specifications include an operating voltage range of 10 to 30 V DC, with a no-load supply current under 20 mA. It features two push-pull outputs that are short-circuit and reverse polarity protected, handling a maximum switching voltage of 30 V DC and a switching current of up to 100 mA. The response time is quick, at just 1 ms, with a maximum switching frequency of 500 Hz. The device complies with product standard EN 60947-5-2 and demonstrates excellent resistance to shock and vibration according to IEC / EN 60068 standards. With a degree of protection rated at IP67/IP69K, it is suitable for harsh environments, operating in temperatures ranging from -20 to 60 °C. The sensor is housed in ABS material, and its optical face is made of PMMA, contributing to its lightweight design at approximately 10 g.

The triangulation sensor operates effectively within a detection range of 10 to 80 mm, making it suitable for complex applications. Its miniature design incorporates a fixed cable with an M12 plug, allowing for easy integration. Notably, the device utilizes modulated visible red light at 660 nm as its light source, ensuring precise object detection.With a light/dark on functionality, this sensor offers flexibility in operational settings. The Designation Code for this model is ML4.2-8-H-80-RT/40b/110/115b. The sensor's ambient light limits facilitate operation in diverse lighting conditions, withstanding up to 40,000 Lux under continuous light and 5,000 Lux under modulated light.Electrical specifications include an operating voltage range of 10 to 30 V DC and a no-load supply current of less than 25 mA. Its push-pull output is designed to be short-circuit and reverse polarity protected, with a maximum switching voltage of 30 V DC and a current of 100 mA. This model features a rapid response time of 0.5 ms and a switching frequency of 1,000 Hz.Constructed from ABS with a glass optical face, the sensor is rated IP67/IP69K for protection against environmental factors. It can operate within temperatures from -20 to 60 °C and is stored at temperatures ranging from -20 to 75 °C. The device is compliant with relevant standards, including EN 60947-5-2:2007, and has received CE and UL approvals.

The Tab-Ex 02 DZ2 (DIV 2 & Zone 2/22) operates on the latest available Android firmware and integrates WWAN (LTE) connectivity alongside WiFi capabilities. This model supports a wide range of mobile standards, including LTE Cat. 6, ensuring effective communication in various environments. The equipment is designed with a processor featuring Exynos 7 Octa technology, clocking at 1.6 GHz, and is equipped with 3 GB of RAM, facilitating efficient performance.Featuring a 20.31 cm TFT LCD display with a resolution of 1280 x 800 pixels, the device supports capacitive multitouch and can be operated while wearing gloves. It has a brightness of 480 nits and can render 16 million colors, improving usability in diverse lighting conditions. The built-in cameras include a 5 MP front camera and an 8 MP main camera, capable of Full HD video recording at 30 fps.Powering the device is a Li-Ion battery rated at 16.91 WH, providing an operating duration of up to 11 hours. Furthermore, the Tab-Ex 02 features a microSD card slot, accommodating storage expansions up to 256 GB. With a mass of 579 g and dimensions measuring 127.6 mm x 247.7 mm x 9.9 mm, the tablet is robust yet portable, featuring an IP64 protection class, making it suitable for use in hazardous areas.For environments with stringent safety standards, this model possesses ATEX certification (EPS 18 ATEX 1 055 X) and is approved for Class I, Division 2, Groups A, B, C, D T5, as well as Class I, Zone 2, Group IIC T5. The device comes complete with a protective cover, S Pen, USB cable, travel charger, documentation, and a microSD flash card, ensuring comprehensive support from the outset. This information aligns with the designated code Tab-Ex02-DZ2-WWANEUR-ANDCS00.Tab-Ex02-DZ2-WWANEUR-ANDCS00..

The area scanner, designated as FLT-8-HW-2800-300/25/31, features a detection field measuring 300 mm x 500 mm at a sensor range of 2000 mm, making it suitable for various applications in monitoring environments. This device operates with a minimum detection range of 0 mm and a maximum of 2800 mm, utilizing modulated infrared light from four IREDs to achieve reliable performance.Functionality includes a background evaluation mode, supported by a light-on relay contact output that activates at a switching voltage of 48 V AC/DC and a maximum switching current of 2 A. The response time is set at 100 ms, ensuring prompt detection. The area scanner is equipped with an LED indicator to signify operational status and features a sensing range adjuster for customization.Electrical specifications indicate an operating voltage range of 15 to 48 V AC/DC, with a power consumption of 2.5 W and a no-load supply current of 100 mA. The device meets various compliance standards, including EMC Directive 2004/108/EC and product standards EN 60947-5-2:2007+A1:2012, ensuring its reliability in diverse environments.Designed for robustness, the scanner operates effectively in ambient temperatures ranging from -20 °C to 60 °C and has a degree of protection rated at IP65. The housing is constructed from Novodur black material, and the optical face is made of red glass. Its dimensions are 150 mm in width, 64 mm in height, and 52 mm in depth, with a total mass of 320 g. Additionally, the product comes with a 2 m connecting cable.

The retroreflective sensor, designated as ML6-54-F/25/115/136, is suitable for various standard applications. It utilizes a modulated visible red light source at 660 nm and includes a polarization filter to enhance detection capabilities. The effective detection range extends up to 6 meters, with a maximum reflector distance of 5 meters. The sensor maintains a detection threshold at 6 meters, ensuring reliable performance in diverse environments. With an IP67 / IP69K protection class, this sensor is constructed to endure harsh conditions, while its ambient temperature tolerance ranges from -20 °C to 60 °C (-4 °F to 140 °F). The housing is made from ABS, and the optical face is composed of PMMA, ensuring durability and clarity. The device features a fixed 2 m cable for reliable connectivity. Electrical specifications include an operating voltage between 10 to 30 V DC, with a maximum switching current of 100 mA and a response time of 500 µs. Two push-pull outputs are configured for light/dark switching, and the sensor is designed to be short-circuit proof and reverse polarity protected. Operational indicators include green and yellow LEDs to indicate power status and switching state, respectively. The sensor is compliant with several standards, including EN 60947-5-2 and IEC/EN 60068, ensuring its reliability in terms of shock, impact resistance, and vibration resistance.

This retroreflective sensor features a compact design suitable for standard applications and incorporates a polarization filter. With a detection range of up to 3.5 m, it operates using modulated visible red light emitted from an LED source.The sensor is equipped with an NPN output and is configured for dark-on operation. It includes a fixed cable measuring 200 mm with an M12 plug for connectivity. The optical face has an approximate diameter of 180 mm at a distance of 3.5 m and an opening angle of about 3°.In terms of electrical specifications, the operating voltage ranges from 10 to 30 V DC and has a maximum ripple of 10%. The device consumes less than 20 mA of no-load supply current. It supports a maximum switching voltage of 30 V DC and can handle a switching current of up to 100 mA, with a response time of 0.5 ms and a switching frequency of 1000 Hz.Compliance with standards includes EN 60947-5-2:2007 and IEC 60947-5-2:2007, adhering to protection class II with pollution degree 1-2 according to IEC 60664-1. The sensor is operable in ambient temperatures ranging from -20 to 60 °C and can be stored at temperatures between -40 and 75 °C. The degree of protection is rated at IP67/IP69K, ensuring suitability for harsh environments.Designation Code: ML7-55/59/102/115b