Drives & Motors

The Siemens SIRIUS 3RW4454-6BC44 soft starter is a high-performance unit designed to provide smooth and controlled motor starting. This advanced device reduces mechanical stress and electrical surges during startup, extending the lifespan of your equipment.With impressive ratings at 400V and 40°C, the 3RW4454-6BC44 can handle up to 615 Amperes and 355 kW in standard operation. For root-3 configurations, its capacity significantly increases to 1065 Amperes and 630 kW. It is compatible with a wide main circuit voltage range of 200-460V AC and operates with a control supply voltage of 230V AC. Equipped with robust screw terminals, this Siemens soft starter ensures secure and straightforward wiring.Ideal for a broad spectrum of industrial applications requiring gentle and efficient motor acceleration and deceleration, the SIRIUS 3RW4454-6BC44 soft starter is a reliable choice for your equipment. However, please note that this product has been phased out, and its successor is the SIRIUS 3RW5. The preferred successor type is 3RW5552-6HA14.

The PSR16-600-70 Softstarter is designed to provide a smooth start and stop for small three-phase motors. With a rated maximum operational current of 16 A and an operating voltage range of 208...600 V AC, this softstarter ensures reliable performance in various applications.Key Features:Two-phase control soft start and stop through a voltage rampBuilt-in bypass for easy installation and energy savingRUN signal available from a relay output in NO (normally open state)Easy start/stop ramp and time setting with three potentiometers on the frontCompact design suitable for small three-phase motors with nominal currents from 3...105 ACan manage up to 100 starts per hourCommon applications include pumps, fans, compressors, and conveyors. The PSR16-600-70 Softstarter is often used in combination with a manual motor starter (MMS) from ABB, and mechanical connection kits are available. Fieldbus communication can be enabled by an external adaptor and a Fieldbus plug.

The PSR72-600-70 softstarter boasts a rated maximum operational current of 72 A, accommodating a wide operating voltage span from 208...600 V AC. It is equipped with a two-phase control soft start and stop through a voltage ramp, ensuring smooth motor operation. The softstarter features an integrated bypass for easy installation and energy savings. A RUN and TOR signal is available from a relay output in NO (normally open state). The start/stop ramp and time can be easily set using three potentiometers on the front panel. This softstarter is often used in combination with a manual motor starter (MMS) from ABB, and mechanical connection kits are available. An alternative option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications include pumps, fans, compressors, and conveyors.

The Softstarter PSR60-600-11 boasts a maximum operational current of 60 A, catering to an operating voltage range from 208 V to 600 V AC. Its rated control voltage is 24 V AC/DC.This device features a two-phase control soft start and stop through a voltage ramp, ensuring smooth motor operation. It also includes a built-in bypass for easy installation and energy savings. The PSR provides a RUN and TOR signal from a relay output in NO (normally open state).The start/stop ramp and time can be easily adjusted using three potentiometers on the front panel. This softstarter is often used in combination with an ABB manual motor starter (MMS), for which mechanical connection kits are available. Alternatively, Fieldbus communication can be enabled by an external adaptor and a Fieldbus plug.The PSR range represents our most compact softstarters, offering basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3 A to 105 A and can handle up to 100 starts per hour. Common applications include pumps, fans, compressors, and conveyors.

The Siemens MicroMaster 440 Spare Part is a high-performance motor designed for industrial applications. It operates at a voltage range of 380-480V with a frequency of 47-63Hz, providing constant torque and efficient power transmission. The motor features an overload capacity of 150% for 60 seconds and 200% for 3 seconds, adhering to square-law torque characteristics. With dimensions of 245x185x195mm (HxWxD), this robust motor offers a degree of protection IP20 and can withstand ambient temperatures ranging from -10°C to +50°C without additional overload protection (AOP/BOP). This spare part is an essential component for maintaining the reliability and efficiency of your industrial machinery.

The ABB PSTX37-600-70 is a versatile softstarter designed for medium to large three-phase motors, offering a rated maximum operational current of 37A and an operating voltage span from 208V to 600V AC. The rated control voltage is between 100V to 250V AC at 50/60 Hz. The PSTX features a three-phase control soft start and stop through a voltage or torque ramp, with built-in bypass for easy installation and energy saving. It offers relay outputs in NO (normally open state) for RUN, TOR and Event signals. The PSTX also has functions such as current limit, kickstart, analog output, EOL, motor heating, and pump cleaning. The PSTX comes with standard features like jog, braking, stand-still brake, diagnostics, sequence start, and emergency/fire pump mode. It also has a detachable full graphic display with IP66 and 4x outdoor rating for easy interaction. Communication with the PSTX can be done through hardwire inputs Start/Stop/Reset of fault, programmable digital inputs, built-in Fieldbus communication Modbus RTU, optional ANYBUS modules, or an external adaptor and a Fieldbus plug. The PSTX is suitable for medium to large-sized three-phase motors with nominal currents from 30A to 1250A inline connection or 52A to 2160A inside delta connection.

The Allen Bradley Bulletin MPL is a low-inertia brushless rotary servo motor designed for demanding automation applications that require responsive positioning, smooth motion, and dependable repeatability. Its compact IEC metric construction supports efficient integration into machine designs where space, dynamic performance, and installation flexibility are important.This motor combines a keyed shaft, free mounting holes, and a right-angle rotatable SpeedTEC DIN connector to simplify mechanical and electrical integration. The multi-turn absolute encoder feedback supports accurate position retention and reliable control, while the 24V DC brake adds holding capability for safer operation in vertical or load-sensitive applications. Built for industrial servo systems, it is suited to environments that demand precise motion control and robust machine uptime.

This Altistart 48 soft start/soft stop unit is a controller with 6 thyristors used for torque-controlled soft starting and stopping of three-phase asynchronous motors. It offers soft starting and deceleration functions along with machine and motor protection functions, as well as functions for communicating with control systems. It works at a rated supply voltage from 208V to 690V AC and up to 170A rating. Altistart 48 torque control enables starting without mechanical stress and smooth control of hydraulic transitions, with a single acceleration ramp making adjustments is quick and easy, whatever the load. It is suitable for motors with power rating up to 150hp (at 575V) / 160kW (at 690V) for standards applications and 125hp (at 575V) / 110kW (at 690V) for severe applications. It weighs 12.4kg and its dimensions are, 200mm wide, 340mm high, 265mm deep. It is designed for use in the most common applications for centrifugal machines, pumps, fans, compressors and conveyors, which are primarily to be found in the construction, food and beverage and chemical industries. It complies with IEC/EN 60947-4-2 standard and is certified CE, UL, CSA, DNV, C-Tick, GOST, CCC, NOM, SEPRO, and TCF. The Altistart 48 is connected directly to the Modbus bus via its RJ45 connector port, It can also be connected to Ethernet, Fipio, Profibus DP and DeviceNet networks via a module (bridge or gateway) to order separately. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. Altistart 48 delivers high performance with its Torque Control System (TCS) for controlled starting and deceleration, an easy integration in enclosures and control systems. This range provides also continual improvement of your machine operation by reducing mechanical or hydraulic stress and limiting energy loss and temperature rise, plus more.

The SIRIUS soft starter is a reliable solution for motor control, offering a range of standard values at 460 V and 50 °C. It can handle up to 26 A for 7.5 HP or 15 HP applications, and up to 45 A for 30 HP applications. The starter also supports screw terminals for both 200-460 V AC and 115 V AC applications.This product is a phased-out model, with the preferred successor being the SIRIUS 3RW5. For users looking to upgrade, we recommend considering the SIRIUS 3RW5516-1HA14 as an alternative.

The softstarter PSE170-600-70 has a rated maximum operational current of 170 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general pur­pose softstarter. It’s a perfect balance be­tween high starting capacity and cost effi­ciency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.

The PSR12-600-70 softstarter is designed for applications requiring a rated maximum operational current of 12 A. It operates within a voltage span of 208 to 600 V AC, with a control voltage range of 100 to 240 V AC at 50/60 Hz. The PSR softstarter features a two-phase control soft start and stop through a voltage ramp. It includes built-in bypass for easy installation and energy saving. The device also provides a RUN signal from a relay output in the normally open state. The start/stop ramp and time can be easily set using three potentiometers on the front of the unit. This softstarter is often used in combination with a manual motor starter (MMS) from ABB, and mechanical connection kits are available for this purpose. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range represents our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3 to 105 A and can manage up to 100 starts per hour. Common applications include pumps, fans, compressors, and conveyors.

The SINAMICS G120C is a high-performance motor controller designed for applications requiring a rated power of 0.55kW with a 150% overload capability for 3 seconds. This model operates at 380-480 V, 3 AC, with a frequency range of 47-63 Hz and an unfiltered I/O interface that includes 6 digital inputs (DI), 2 digital outputs (DO), 1 analog input (AI), and 1 analog output (AO). The controller features Safe-Torque-Off technology for enhanced safety, integrated fieldbus communication via USS/MODBUS RTU protocols, and a degree of protection rating of IP20/UL open type. The compact design measures FSA 196x73x203(HxWxD) and includes an external 24V power supply.

The PSE60-600-70 Softstarter, manufactured by ABB, is a robust and reliable device designed for controlling and starting three-phase motors. It boasts a rated maximum operational current of 60 A with an operating voltage range from 208 to 600 V AC.The softstarter features a two-phase control with a soft start and stop through a voltage or torque ramp, ensuring smooth operation and energy efficiency. It also offers built-in bypass for easy installation and various protection functions such as current limit, kickstart, analog output, EOL (end of life), underload, and locked rotor protection.The PSE60-600-70 Softstarter is equipped with an illuminated display that uses symbols to become language neutral. It can be controlled via hardwire inputs Start/Stop or by Reset of fault, or through the built-in fieldbus communication Modbus RTU. An external adaptor and a Fieldbus plug are also available for communication purposes.This softstarter is an ideal choice for small to medium-sized three-phase motors with nominal currents from 18 to 370 A. It is suitable for applications such as pumps, fans, compressors, and conveyors.

The ABB PSR SSTR is a compact range of softstarters that offer simple yet effective starting solutions. These devices are designed to perform well in applications where multiple starts are required per hour, making them ideal for installations where space is limited. Key Benefits: Compact and space-saving design Capable of handling many starts per hour Energy-efficient with built-in bypass for reduced energy loss at full speed Main Features: Rated operational current: 3 to 105 A Operational voltage: 208–600 V AC Control supply voltage: 24 V AC/DC or 100–240 V AC

The PSR45-600-70 Softstarter offers a rated maximum operational current of 45 A, with an operating voltage span from 208 V to 600 V AC. The control voltage is set between 100 V and 240 V AC at 50/60 Hz. This device features a two-phase control soft start and stop through a voltage ramp, ensuring smooth motor operation.The PSR45-600-70 Softstarter comes with built-in bypass for easy installation and energy saving. It also provides a RUN and a TOR signal from a relay output in NO (normally open state). The start/stop ramp and time can be easily set using three potentiometers on the front.This softstarter is often used in combination with a manual motor starter (MMS) from ABB, and mechanical connection kits are available. Alternatively, Fieldbus communication can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values, suitable for small three-phase motors with nominal currents from 3 to 105 A and capable of managing up to 100 starts per hour.Common applications include pumps, fans, compressors, and conveyors. The PSR45-600-70 Softstarter is a reliable choice for industrial automation systems requiring smooth motor operation and energy efficiency.

The ABB PSR25-600-11 Softstarter is designed for a rated maximum operational current of 25 A with an operating voltage range from 208 to 600 V AC. It features a two-phase control soft start and stop through a voltage ramp, along with built-in bypass for easy installation and energy savings. The device also includes a relay output in NO (normally open state) for RUN and TOR signals. The start/stop ramp and time can be easily set using three potentiometers on the front of the unit. The ABB PSR Softstarter is often used in combination with a manual motor starter (MMS), and mechanical connection kits are available for this purpose. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values, suitable for small three-phase motors with nominal currents from 3 to 105 A and capable of managing up to 100 starts per hour. Common applications for the ABB PSR Softstarter include pumps, fans, compressors, and conveyors.

The SIMATIC DP Interface Module IM151-3 PN FO is designed for use with the ET200S series of automation systems. It provides two PROFINET FOC interfaces that allow for seamless integration of up to 63 peripheral modules. This module is also compatible with PROFIsafe modules, ensuring maximum safety in industrial applications.With a maximum station width of 2 meters and an integrated termination module, the IM151-3 PN FO offers a compact and efficient solution for automation needs. Its robust design ensures reliable performance even in challenging industrial environments.

The SIRIUS soft starter is a versatile solution for applications requiring a reliable and efficient start-up process. It supports a wide range of voltage inputs, from 200 to 460 V AC, with a standard operating voltage of 230 V AC. This product features screw terminals for easy installation and connection. It is designed to handle high amperage levels, with a capacity of up to 50 A and a power rating of 22 kW.The SIRIUS soft starter also offers a standard rating of 29 A and 15 kW for applications that require lower power requirements. It is designed to operate at temperatures up to 40 °C, making it suitable for use in various environments. This product is a phased-out model, with the SIRIUS 3RW5 being its preferred successor. The recommended successor type is >>3RW5516-1HA14

The ABB PSR SSTR is a versatile softstarter designed to cater to a wide range of industrial applications. It boasts a compact design, making it an ideal choice for installations where space is at a premium.This softstarter is equipped with advanced features such as soft start and stop, which ensure smooth transitions between on and off states. Its robust construction allows it to handle multiple starts per hour without compromising on performance.The PSR SSTR also comes with an energy-saving feature that reduces energy loss at full speed by incorporating a built-in bypass. This not only enhances its efficiency but also contributes to cost savings in the long run.With a rated operational current ranging from 3 to 105 A and an operational voltage of 208–600 V AC, this softstarter is capable of handling high-power applications. It can be powered by either 24 V AC/DC or 100–240 V AC, providing flexibility in installation.

The PSR9-600-70 softstarter boasts a maximum operational current rating of 9 A, with a voltage range from 208 V to 600 V AC. It is designed for a control voltage between 100 and 240 V AC at 50/60 Hz. The device features a two-phase control soft start and stop through a voltage ramp. It also includes built-in bypass for easy installation and energy savings. A RUN signal is available from a relay output in NO (normally open state).The start/stop ramp and time can be easily set using three potentiometers on the front of the device. This softstarter is often used in combination with a manual motor starter (MMS) from ABB, for which mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values.These softstarters are suitable for small three-phase motors with nominal currents from 3 to 105 A and can handle up to 100 starts per hour. Common applications include pumps, fans, compressors, and conveyors.