General Accessories

The M12 female socket connector, designated as SAIL-M12BG-4S5.0U, features a 4-pole configuration and a cable length of 5 meters. This connector is designed without a connector on one end, ensuring…

The A15QS Amp-Trap® Form 101 high speed fuses are specifically engineered to safeguard semiconductor devices, including diodes, operating at a maximum voltage of 150VAC/DC. With an ampere rating of…

The Amp-Trap A2K-R series fuses are engineered for current-limiting applications, providing reliable protection in scenarios with significant short-circuit currents. These fast-acting fuses are ideal…

The A50P Amp-Trap® Form 101 high-speed fuses are specifically designed for applications such as DC drives and uninterruptible power supplies, where enhanced protection and reliability are critical…

The A6D-R time-delay fuses are engineered to provide IEC Type 2 'no damage' protection for mains, feeders, and branch circuits that service both motor and non-motor loads. With a rated voltage of…

The fuse holder supports either 1-1/2" x 13/32" (10 x 38 mm) midget or Class CC fuses, facilitating rapid installation through its design. The securing nuts or screws are captive, minimizing the need…

The A30QS Amp-Trap Semiconductor Protection fuse is specifically engineered for the protection of power semiconductors, such as diodes and phase control SCRs, within applications requiring voltages…

The Inside Corner Fitting is specifically designed for routing cables efficiently along inside corners while adhering to a 1 inch bend radius. This fitting integrates seamlessly with the LD3 raceway…

The KP-1165Y Terminal Kits contain an assortment of terminals including (18) PV18-8R, PV14-10R, PV18-6F, PV14-8F, (10) PV10-8R, PV10-10R, as well as BSV18X, BSV14X, BSV10X, and DV18-250B, DV14-188B…

The L60030C-1PQDINR model from the L600C-DINR Series features a 30 Ampere rating and is designed for use with Class CC fuses. This fuse block integrates directly with 35mm 'hat' type DIN rails…

This PCB plug-in connector is designed with a male header and a 5.08 mm pitch, accommodating 9 poles at a 90° angle. The solder pin length measures 3.2 mm, ensuring effective connectivity. The…

The SL 5.08HC/12/90B 3.2SN OR BX is a specialized PCB plug-in connector designed for reliable board connectivity. With a 5.08 mm pitch and a total of 12 poles, this connector is optimized for THT…

The E2.2S 1250 air circuit breaker is engineered for robust performance in AC environments, rated for 1250 A with a maximum operational voltage of 690 V. It integrates a solid-state release…

The E6.2V 6300 Ekip Dip LSIG is a three-pole air circuit breaker specifically engineered for alternating current (AC) applications. It is equipped with a solid-state release mechanism, enhancing its…

The Fusion Splice LC Connector is engineered for the installation of multimode fiber optics conforming to the OM3, OM4, and OM5 specifications. Designed for 900-micron tight-buffered or 250μm…

The USB Type A blockout device serves to safeguard USB A openings by introducing a physical barrier, effectively restricting unauthorized access. This device also shields the port from dust and…

The LM 3.50/03/135 3.2SN OR BX terminal is designed for printed circuit boards, featuring a compact width of 11.1 mm and a height of 15.9 mm. With a clamping yoke connection, it accommodates…

The PCB plug-in connector features a male header suitable for THT/THR solder connections with a pitch of 5.08 mm and a 90° angle. This component supports two poles with a solder pin length of 1.5 mm…

The 3.81 mm PCB plug-in connector is engineered for use in various electronic applications, accommodating a total of 16 poles with a solder pin length of 1.5 mm . The connector is designed with a…

The Coupler connector CA-06P1N8A9008 is designed for reliable connections in various applications. It utilizes an M23 thread type and is constructed with a shielded housing for enhanced protection…